Transition Networks DVP 5140K manual METTF1011 -120

Page 44

METTF1011 (-120 and -060)

 

Channel Speed

10 Mb/s

Fiber-Optic Ports

 

Cable:

Multimode fiber-optic

Connector Type

ST

Wavelength

850 nm

Transmitter Power

-15 dBm

Receiver Sensitivity

-32 dBm

Maximum Loss Budget

18 dB

Maximum distance

3 km (1.8 mi) full-duplex

Twisted-Pair Copper Ports

 

Cable

Category 3 (or better) copper

Connector Type

RJ-45

Maximum distance

100 meters (328 feet)

METTF1013 (-120 and -060)

Channel Speed

10 Mb/s

Fiber-Optic Ports

 

Cable:

Multimode fiber-optic

Connector Type

SC

Wavelength

850 nm

Transmitter Power

-15 dBm

Receiver Sensitivity

-32 dBm

Maximum Loss Budget

18 dB

Maximum distance

3 km (1.8 mi) full-duplex

Twisted-Pair Copper Ports

 

Cable

Category 3 (or better) copper

Connector Type

RJ-45

Maximum distance

100 meters (328 feet)

B.2

METTF10xx, MFETF10xx

Image 44
Contents Multichannel Media Converter Compliance Information Table of Contents Operation AC Power Supply Module/Optional Redundant AC Power IntroductionMultichannel Media Converter Models Media Converter ChannelsReset Button IntroductionSerial Port Multichannel Media Converter Management ModuleManagement Module LEDs Multiport Management Software at Remote Network RJ-45 ConnectionPage Installation Connecting Channel Ports to NetworkPreparing the Site Installation Unpacking METTF10xx, MFETF10xx EquipmentInstalling Optional Redundant Power Supply Module Setting Management Module JumperInstalling Power Supply Module Installing Multichannel Media Converter at Site Standard Rack InstallationTable-Top Installation Powering the Multichannel Media Converter Setting Full-Duplex/Half-Duplex Configuration Switches Connecting Channel Ports to NetworkSetting FDX/HDX Channel Configuration Switches Testing Fiber Links Installing Fiber-optic CableInstalling Cable Installing Twisted-Pair Copper Cable Norm TestSetting Network Management Parameters NoneEthernet Parameters METTF10xx, MFETF10xx Installing Multiport Management Software at Remote NMS TCP/IPPage Operation Using Status LEDs Power Supply and Link Test Switch LEDsManagement LEDs Channel LEDsUsing a Terminal Emulator OperationUsing Terminal Emulator Operation Using Multiport Management Software at Remote NMS Standalone Win32* SystemsMain Power Supply Status is green for OK or red for fail Page Maintenance Fault Isolation and Recovery Is Multichannel Media Converter Receiving Power?Are Channel Links Good? Fault Isolation and Recovery Hardware Replacement Procedures Replacing Management ModuleReplacing AC Power Supply Module Technical Specifications PowerPage Channel Cable Specifications Fiber-Optic CableMETTF1011 -120 MFETF1011