Transition Networks DVP 5140K manual METTF10xx, MFETF10xx

Page 24

2.8Connecting to TCP/IP Network Management at Remote Network Management Station (NMS)

It is recommended that the Multichannel Media Converter RJ-45 MANAGEMENT port be connected to the TCP/IP network management station (NMS) through a switch or a hub that also is connected to other managed network devices. If the Multichannel Media Converter RJ-45 MANAGEMENT port is connected directly to the NMS, the NMS will manage only that Multichannel Media Converter.

1.Locate or build a 10BASE-T-compliant twisted-pair shielded cable with RJ-45 plug connectors installed at both ends.

NOTE: Straight-through or crossover cable can be used, since the Multichannel Media Converter provides either an RJ-45 10BASE-T Ethernet port with an associated MDI-II/MDI-X switch or two RJ-45 10BASE-T ports, one configured as straight-through and the other configured as crossover, for connecting the Multichannel Media Converter to TCP/IP network management.

2.Connect RJ-45 connector at one end of cable to Multichannel Media Converter RJ-45 twisted-pair Management port.

3.Connect RJ-45 connector at other end of cable to RJ-45 port on 10BASE-T-compliant hub or switch.

4.Verify that the Multichannel Media Converter MANAGEMENT L(i)NK LED is illuminated. If not, change the MDI-II/MDI-X switch setting or the position of the RJ-45 shielded cable connection.

5.Verify that the appropriate LINK indicator on the hub or switch is illuminated.

NOTE: If installing Multiport Management Software at the NMS, skip the following steps and proceed to the next section.

6.Referring to documentation that comes with the NMS management application, copy the MIB file (SUPPLIED - located on the Multiport Management Software to the default NMS management application directory.

7.Again referring to documentation that comes with the NMS management application, add the new MIB to the NMS management application list and recompile the MIBs.

2.14

METTF10xx, MFETF10xx

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Multichannel Media Converter Compliance Information Table of Contents Operation AC Power Supply Module/Optional Redundant AC Power IntroductionMultichannel Media Converter Models Media Converter ChannelsReset Button IntroductionMultichannel Media Converter Management Module Management Module LEDsSerial Port Multiport Management Software at Remote Network RJ-45 ConnectionPage Installation Connecting Channel Ports to NetworkPreparing the Site Installation Unpacking METTF10xx, MFETF10xx EquipmentInstalling Optional Redundant Power Supply Module Setting Management Module JumperInstalling Power Supply Module Installing Multichannel Media Converter at Site Standard Rack InstallationTable-Top Installation Powering the Multichannel Media Converter Connecting Channel Ports to Network Setting FDX/HDX Channel Configuration SwitchesSetting Full-Duplex/Half-Duplex Configuration Switches Installing Fiber-optic Cable Installing CableTesting Fiber Links Installing Twisted-Pair Copper Cable Norm TestSetting Network Management Parameters NoneEthernet Parameters METTF10xx, MFETF10xx Installing Multiport Management Software at Remote NMS TCP/IPPage Operation Using Status LEDs Power Supply and Link Test Switch LEDsManagement LEDs Channel LEDsUsing a Terminal Emulator OperationUsing Terminal Emulator Operation Using Multiport Management Software at Remote NMS Standalone Win32* SystemsMain Power Supply Status is green for OK or red for fail Page Maintenance Fault Isolation and Recovery Is Multichannel Media Converter Receiving Power?Are Channel Links Good? Fault Isolation and Recovery Hardware Replacement Procedures Replacing Management ModuleReplacing AC Power Supply Module Technical Specifications PowerPage Channel Cable Specifications Fiber-Optic CableMETTF1011 -120 MFETF1011

DVP 5140K specifications

Transition Networks DVP 5140K is a robust device tailored for extending Ethernet networks over longer distances. This equipment stands out due to its reliability, high performance, and advanced features, making it a dependable choice for many organizations seeking to enhance their network capabilities.

One of the most notable features of the DVP 5140K is its support for Power over Ethernet (PoE). This technology allows the device to deliver both data and power to connected devices like IP cameras, wireless access points, and VoIP phones via a single Ethernet cable. The DVP 5140K supports various PoE standards, providing flexibility and ensuring compatibility with a wide range of PoE-enabled devices.

The DVP 5140K operates on an advanced switching architecture that allows it to handle a high volume of traffic without compromising performance. Its ability to process data at wire-speed ensures minimal latency and optimal throughput, which is essential for organizations that rely on real-time data transfer for operations. The device supports VLAN tagging, enabling users to create distinct network segments for improved security and performance.

Additionally, the device is designed with robust management features. It includes a web-based graphical user interface (GUI) that simplifies configuration and monitoring tasks. Network administrators can easily manage the device via SNMP (Simple Network Management Protocol), making it compatible with existing network management systems. The DVP 5140K also supports Quality of Service (QoS) settings, ensuring that critical applications receive the necessary bandwidth and prioritization.

Another significant characteristic of the DVP 5140K is its durability and suitability for various environments. The device is built with a metal chassis, providing resilience against physical impacts and environmental factors. It operates effectively in temperatures ranging from -40°C to 70°C, making it ideal for deployment in both indoor and outdoor settings.

In conclusion, Transition Networks DVP 5140K is a versatile and powerful networking solution combining PoE support, high-performance data processing, effective management tools, and durability. These features make it an excellent choice for organizations looking to expand their network infrastructure while ensuring reliability and efficiency in their operations. Whether for enterprise networks, public spaces, or industrial applications, the DVP 5140K meets the demands of modern networking with style and precision.
Top Page Image Contents