Speco Technologies CS4, CS8 manual Front Panel Controls, Menu Button

4- & 8-Channel Digital Video Recorder

Chapter 3 ─ Configuration

NOTE: Your DVR should be completely installed before proceeding. Refer to Chapter 2 ─ Installation.

Front Panel Controls

	Figure 3 ─ DVR front panel.
Menu Button	Copy Button	Esc Button
Play/Stop Button	Camera Buttons	Arrow Buttons
Play/Pause Button	HDD LED	Power LED
USB Port

The front panel looks and operates much like a VCR combined with a multiplexer. The following describes each button and control. Take a few minutes to review the descriptions. You will use these to initially set up your DVR and for daily operations.

NOTE: A separate Alarm button on the front panel is not provided. Pressing any button on the front panel resets alarm output including the internal buzzer when the alarm is activated. However, when you are in the menu or PTZ mode, you have to exit the menu or PTZ mode first to reset alarm output.

NOTE: The infrared sensor is just to the right of the USB ports. Make certain that nothing blocks the sensor, or the remote control will not function properly.

NOTE: When you use wireless communication devices (such as Wi-Fi or Bluetooth) near the DVR, the remote control might not function properly.

NOTE: You can also use a USB mouse (not supplied) to navigate through the screens and menus much like you would on a computer.

Menu Button

In the Live Monitoring mode and Search mode, pressing the MENU at the top of the screen.

button displays the menu icons

7