4- & 8-Channel Digital Video Recorder
Highlighting the Install button and pressing the 
button will install the selected software package. Highlighting the Cancel button and pressing the 
button will close the window without upgrading the software. If the upgrade package file is not installed on the DVR properly, you will get an error message.
CAUTION: The system restarts automatically after completing the upgrade, and it takes approximately one minute to restart. Do NOT remove the USB device until the DVR restarts, otherwise the system upgrade will not be completed properly.
CAUTION: The USB device must be FAT16 or FAT32 format.
You can import saved DVR settings or export the current DVR settings. To import saved DVR settings, connect the USB device containing the setup file (.dat) to the DVR. Highlight Setup – Import… and press the 
button.
Select the desired setup file and press the Import button to import the selected settings and change the DVR settings accordingly. Highlight Include Network Setup and press the 
button to toggle between On and Off. When set to Off, the network settings will not be changed.
To export the current DVR settings, connect the USB device to the DVR. Highlight Setup – Export… and press the 
button.
Highlight the box beside File name and press the 
button. A virtual keyboard allows you to enter the file name. Selecting Export will save the current settings in .dat file format on the USB device.
NOTE: Even after changing the DVR settings by importing saved settings, the
CAUTION: The USB device must be FAT16 or FAT32 format.
Highlight Show System Log… and press the 
button to display the System Log.
The System Log screen lists system activities (up to 5,000 from the latest) that have occurred along with the time and date. The 
icon will be displayed in the last column for system activities of the remote site. You can scroll through the log pages by using the Up and Down arrows, or you can go directly to a log page by entering the log page number in the box at the bottom left of the screen. Highlight Close and press the 
button to exit the screen.
To export the system log information, connect the USB device to the DVR. Highlight Export… and press the 
button.
15