Operation Instruction
Copy Button
Pressing the
COPY
button allows you to copy video clips.
Esc Button
During menu setup, pressing the
ESC
button closes the current menu or setup dialog box.
Play/Stop Button
Pressing the PLAY/STOP button enters the playback mode, and pressing the button again exits the playback mode. When entering the playback mode, video is paused. Pressing the 
(Play/Pause) button plays back video at regular speed. The screen displays 
when the DVR is in the Pause mode and the screen displays 
when the DVR is playing back video.
Camera Buttons
Pressing the individual camera buttons will cause the selected camera to display full screen. Buttons 1 to 9 are also used to enter passwords.
Arrow Buttons
These buttons are used to navigate through menus and GUI. You can also use them to change numbers by highlighting a number in the menu and using the Up and Down arrow buttons to increase or decrease the number’s value.
When in the PIP display format, pressing the Up and Down arrow buttons moves the position of the small screen
In the playback mode, pressing the 
button plays video backward at high speed. Pressing the
button again toggles the playback speed from 
, 
and 
, and the screen displays 
, 
and 
respectively. While playing video, pressing the 
button plays video forward
at high speed. Pressing the button again toggles the playback speed from 
, 
and 
, and
the screen displays 
, 
and 
respectively. When in the pause mode, pressing the 
button moves to the next image and pressing the 
button moves to the previous image.
Play/Pause Button
In the live monitoring mode, pressing the 
button freezes the current screen and the screen displays 
icon. When in the playback mode, pressing the 
button pauses playing video.
Pressing the 
button selects a highlighted item or completes an entry that you have made during system setup.
HDD LED
The HDD LED flickers when the DVR is recording or searching video on the hard disk drive.
8