Speco Technologies CS8, CS4 manual Event Setup, Alarm-In

Operation Instruction

NOTE: When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings and follows the time settings.

Event Setup

Figure 26 ─ Event menu.

Alarm-In

Highlight Alarm-Inin the Event menu and press the button. The Alarm-Insetup screen appears.

	The alarm terminal strip on the back of the DVR
	has inputs associated with each alarm. You can
	set up each input on the Alarm-Inscreen. You
	can turn each input On or Off by highlighting
	the alarm number and pressing the button.
	Each input can be given a title. Highlight the
	desired Title box and press the button. A
	virtual keyboard appears allowing you to enter
	a title name.
	Each input can be set as NO (normally open) or
Figure 27 ─ Alarm-In Settings setup screen.	NC (normally closed).

You can set up the DVR to start panic recording whenever it senses an input on one of its alarm input connectors. Highlight the box beside Panic Record and press the button. A list of Alarm Inputs appears, and you can select which alarm input you want associated with panic recording. The DVR will continue panic recording until an input on the selected alarm input is released as long as (Panic) in the Live Monitoring menu is not selected to stop the panic recording.

Highlight the Actions 1 and Actions 2 tabs, and the Actions 1 and Actions 2 setup screens appear.

30