Speco Technologies CS4, CS8 manual Sequence, Camera Menu, Alarm

Page 71

4- & 8-Channel Digital Video Recorder

Sequence

Selecting (Sequence) in the Live Monitoring menu causes the cameras to display sequentially. When in one of the multiview formats, selecting Sequence will cause the DVR to go through predefined screen layouts (Full Sequence). Or, the bottom, right screen will display live cameras sequentially (Cameo Sequence). For example, if you select (Sequence) in the Live Monitoring in the 2x2 format, the 8-channel DVR changes pages as follows:

Full Sequence

Cameo Sequence

Selecting again in the Live Monitoring menu exits the Sequence mode. While in the Sequence mode, the icon displays in bottom-left corner if Sequence is selected in the Display setup screen (OSD tab). If all the cameras in a page are Off, or have lost video or are set to Covert (unless the user has authority to view covert cameras), that page will be excluded from the sequence.

NOTE: The Full Sequence for the full sequence monitoring and the Cameo Sequence for the cameo sequence monitoring should be selected in the Display setup screen (Main Monitor tab).

Camera Menu

Selecting (Camera Menu) in the Live Monitoring menu displays the following Camera Menu.

PTZ: Selecting PTZ and choosing the camera number allows you to control the selected camera as long as it has Pan, Tilt and Zoom capabilities. Refer to the following PTZ Mode section for details.

Zoom: Selecting Zoom and choosing the camera number zooms the current image of the selected camera on the screen. Refer to the following Zoom Mode section for details.

Audio: Selecting Audio toggles audio output On and Off.

Color Control: Selecting Color Control and choosing the camera number allows you to control brightness, contrast, hue and saturation for each camera for the selected camera if a user who has Color Control authority logs into the system. It is the same as pressing and holding a camera button for a few seconds.

NOTE: It is important that cameras and monitors are correctly installed and adjusted prior to making any image adjustments using the DVR’s controls.

NOTE: Any image adjustments you make will be applied to both the live video on the monitors and the recorded video.

NOTE: The Camera Menu also can be displayed by clicking the right mouse button on the screen while in the live monitoring mode.

Alarm

Selecting (Alarm) in the Live Monitoring menu resets the DVR’s outputs including the internal buzzer during an alarm. It is the same as pressing any button on the front panel when the alarm is activated.

61

Image 71
Contents Page Page Compliance Notice of FCC Weee Waste Electrical & Electronic Equipment Table of Contents Operation Instruction Channel Digital Video Recorder List of Illustrations Vii Operation Instruction Viii Technical Overview FeaturesTypical DVR installation Required Installation Tools Package ContentsNetwork Port Factory Reset SwitchAudio In/Out Video OutRS485 Port Alarm Input/OutputPower Cord Connector Menu Button Front Panel ControlsCamera Buttons Copy ButtonEsc Button Play/Stop ButtonUSB Port Remote Control ButtonsPower LED Playback Buttons Login/Logout ButtonID Button Sequence ButtonPTZ Button Alarm ButtonLayout Button Zoom ButtonInitial Unit Setup Turning on the PowerLogout screen Setup ScreenInformation System SetupChannel Digital Video Recorder Date/Time Date/Time setup screenStorage Holiday setup screenStorage Information setup screen User Storage Status setup screenOperation Instruction EZ Setup screen EZ SetupDate/Time Setup Internet Connection LAN Setup Record Recording SetupShutdown Very High resolution Schedule Panic Record setup screenDwell in the Settings column, the DVR Pre-Event Alarm-In Event SetupAlarm-In Actions 1 setup screen Motion Detection Motion Detection Actions 1 setup screen Video Loss Motion Detection Actions 2 setup screenVideo Blind DVR checks to see if anything is blinding the camera Text-In Text-In Device setup screenOperation Instruction System Event Text-In Actions setup screenHealth Check setup screen Event Status Network Network SetupNetwork setup screen IP Address Gateway Subnet Mask Dvrns setup screen Help Desk Notification Speco Remote setup screenHighlight the + and press the button to add a mail recipient Notification SNS setup screen Camera Devices SetupHighlight the PTZ tab, and the PTZ setup screen displays Audio Alarm-OutDigital Deterrent Alarm-Out Schedule setup screenOperation Instruction Display Display OSD setup screenMain Monitor setup screen Remote Control setup screen Remote ControlOperation Instruction Live Monitoring OperationFreeze Live Monitoring Menu DisplayCamera Menu AlarmSequence Active Cameo Mode SetupSearch Mode Login/LogoutCovert Camera Zoom ModePTZ Mode Event MonitoringZoom In / Out Playing Recorded Video Recording VideoRecording Audio Search menu Searching VideoGo To Search Menu DisplaySearch Export Event Log Search Data SourceExit Operation Instruction Record Table Search screen Record Table SearchMotion Search Configuration Digital Deterrent section for more detailsChannel Digital Video Recorder Text-In Search screen Text-In SearchClip-Copy screen Clip-CopyOperation Instruction Preparing the USB hard disk drive in Windows USB Hard Disk Drive PreparationSearch Example Text-In Search ExamplesSpeco Remote Operation Instruction Web Monitoring Mode  Change Camera Title Changes the camera name Web Search ModeChannel Digital Video Recorder System Log Notices Problem Possible Solution Error Code NoticesTroubleshooting System Upgrade Related Clip Copy RelatedMap of Screens Video SpecificationsGeneral