Operation Instruction
The information in the Type column describes the storage device.
The capacity of the storage device is displayed in the Capacity column.
The Format column displays whether the device is used for recording (Record) or not (Not Using). Not formatted indicates the device is not formatted.
Figure 13 ─ Storage Information setup screen.
Highlight the box in the Format column for the desired storage device and press the 
button. You will be able to format the device for recording. When selecting Not Using from Use As and highlighting the Format button, the device will not be used for recording.
NOTE: The DVR does NOT support USB hard disk drives with a version lower than 2.0.
The Information column displays whether the device is being used or not. Other indicates the device has been used for another DVR.
Highlight the box in the Information column for the desired storage device and press the 
button. The box beside Recorded Data – From / To displays the time information of recorded data.
Highlighting Clear and pressing the 
button will clear all video data. You will be asked to verify that you wish to clear all data before the DVR erases the video data.
CAUTION: Do NOT disconnect the USB cable or the power from the device while copying video clips. If the USB cable is disconnected while copying video clips, archived data might be lost.
Highlight the Status tab, and the Storage Status setup screen displays.
18