Operation Instruction
Figure 62 ─ Main Monitor setup screen.
Highlight the box beside Mode and press the 
button. You can select between Full Sequence and Cameo Sequence.
Selecting 
(Sequence) in the Live Monitoring menu causes the DVR to sequence cameras, and the DVR can sequence cameras in two modes: “Full” and “Cameo”. In the Full mode, the DVR sequences through the cameras and displays them full screen. In the Cameo mode, the bottom right window in a
NOTE: Any cameras that are Off, have lost video or are set to Covert (unless the user has authority to view covert cameras) will be excluded from the Cameo sequence.
You can define the screen layout in a variety of formats and set the DVR to sequence through the different screen layouts (pages) so that all the cameras will be displayed. You can also set up the DVR to display one camera or a group of cameras all the time while cycling through the remaining cameras in a “cameo” window. This can be done with one camera displayed full screen while displaying the cameo window as a PIP (picture in picture), or displaying the cameras in a grid pattern with the bottom right window as the cameo.
NOTE: Sequence cannot be used in the 3x3 and 1+7 modes of the
You can adjust the display dwell time by highlighting the box beside Interval and pressing the 
button. You can select dwell intervals ranging from 1 second to 1 minute.
Highlight Event Monitoring On and press the 
button. Pressing the 
button toggles between On and Off. When it is On, the DVR will display the camera associated with the event when an event occurs.
Highlight the VGA tab, and the VGA setup screen appears.
Highlight the box beside Resolution and press the 
button. You can select from 800x600, 1024x768 and 1280x1024.
Highlight the box Test box and press the 
button to test how the screen will be displayed with the resolution you set.
Figure 63 ─ VGA setup screen.
56