Operation Instruction
Select the PTZ camera you wish to control. The icon 
flickers on the PTZ camera screen. To use the remote control buttons, press the Left and Right arrow buttons to pan left and right. Press the Up and Down arrow buttons to tilt the camera up and down. Press the ZOOM + button to zoom in, and press the ZOOM – button to zoom out. You can use the FOCUS 
and FOCUS 
buttons to focus the image. You can establish preset positions for PTZ cameras. Press the PRESET SET button to establish Presets. You can quickly move PTZ cameras to Preset positions. Press the PRESET SELECT button to view an established camera Preset position.
Figure 66 ─ PTZ Select Camera menu.
<Set Preset > < Move to Preset > Figure 67 ─ PTZ Preset screen.
You can save camera position settings as “presets” so that you can go directly to desired views.
Once you have the camera at the desired settings, press the PRESET SET button on the remote control, and the Set Preset dialog box will appear. Select the number you want to assign to the preset and press the 
(Play/Pause) button. Use the virtual keyboard to enter the preset name.
Press the PRESET SELECT button on the remote control to load the PTZ preset, and the Move to Preset dialog box will appear. Select the desired preset and press the 
button to load the preset.
While in the PTZ mode, pressing the MENU button and selecting 
(Advanced PTZ) in the menu displaying at the top of the screen displays the Advanced PTZ menu.
Set the feature you wish to control by selecting it from the menu. Refer to the camera manufacturer’s instructions for the proper settings. Depending on the camera specifications, some features may not be supported.
You can use a mouse for convenient PTZ control. Position the mouse pointer at the bottom of the screen, and the following PTZ toolbar will display.
Clicking 
on the left side exits the toolbar. If you want to display the toolbar again, position the mouse pointer at the bottom of the screen. Change the toolbar location by clicking the empty space on the left side of the toolbar and drag it to where you want it located on the screen. Use the arrow buttons on the toolbar to pan or tilt the camera in the direction you want. The other controls on the toolbar perform as described below:
Zoom In / Out | Focus Near / Far |
Iris Open / Close | Set / Load Preset |
64