Speco Technologies CS8, CS4 manual Dwell in the Settings column, the DVR

Operation Instruction

Highlight the Schedule Mode box and press the button. You can select between Simple Mode and Advanced Mode. Selecting Advanced Mode allows you to set up individual recording schedule for each event.

Highlight the + and press the button to add a schedule item.

Highlight the box under the Day heading and press the button to change the days that the scheduled recording will take place. Choose from: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.

Highlight the box under the Range heading and press the button to change the time range that the scheduled recording will take place. The smallest time segment you can use is 15 minutes.

Highlight the box under the Mode heading and press the button to change the recording mode that will be used. Choose from: No Record, Time, Event and Time & Event. (Simple Mode Only)

When the DVR is in the No Record mode, it will not record during the preset day and time range as long as (Panic) in the Live Monitoring menu is not selected. Use the No Record mode when you do NOT want the DVR to record during certain times.

When the DVR is in the Time mode, the The DVR will record and displays the scheduled times.

icon displays at the top-left corner of the screen. icon at the top-left corner of the screen during the

When the DVR is in the Event mode, the red icon displays at the top-left corner of the screen. The DVR will record and displays the icon at the top-left corner of the screen when any event occurs. When the DVR is in the Pre-Eventrecoding mode, the yellow icon displays when there is no event, and the DVR is not recording. When the DVR is in the Pre-Eventmode, the red and display when any event occurs and the DVR starts recoding.

When the DVR is in the Time & Event mode, the DVR will follow the Time settings and the icon displays. The DVR follows the Event settings and the icon displays.

Highlight the box under the Channels heading and press the button to select which cameras will be recorded. (Simple Mode Only)

	Highlight the box under the Settings heading
	and press the button to define the recording
	settings. You can set the ips and Quality (ips,
	Quality and Dwell for Advanced Mode setup)
	of the recording for any modes you set up in the
	Mode column. If you do not set the ips, Quality
	and Dwell in the Settings column, the DVR
	will follow the default settings. See below for
	details.
	NOTE: Descriptions of the Record icons in
Figure 24 ─ Schedule – Settings (Advanced Mode)	the Type column are as follows:
	Time-lapse (Time)	Alarm-In
setup screen.	Motion	Video Loss
	Video Blind	Text-In

28