Fluke 80 Series V manual Electrical Symbols, General Specifications

80 Series V

Calibration Manual

Electrical Symbols

Electrical symbols used on the Meter and in this manual are explained in Table 1.

Table 1. Electrical Symbols

B	AC (Alternating Current)	J	Earth ground
F	DC (Direct Current)	I	Fuse
X	Hazardous voltage.	P	Conforms to European Union directives
W	Risk of Danger. Important	$	Conforms to relevant Canadian
	information. See Manual.		Standards Association directives
M	Battery	T	Double insulated
R	Continuity test or continuity beeper	E	Capacitance
	tone.
t	Underwriters Laboratories	G	Diode
	IEC overvoltage category III		IEC overvoltage category IV
	CAT III equipment is designed to
			CAT IV equipment is designed to protect
	protect against transients in
			against transients from the primary
CAT III	equipment in fixed-equipment	CAT IV
			supply level, such as an electricity meter
	installations, such as distribution
			or an overhead or underground utility
	panels, feeders and short branch
			service.
	circuits, and lighting systems in
	large buildings.
s	Inspected and licensed by TÜV Product Services.

Specifications

General Specifications

Maximum Voltage between any Terminal and Earth Ground: 1000 V rms

WFuse Protection for mA or ∝A inputs: 44/100 A, 1000 V FAST Fuse

WFuse Protection for A input: 11 A, 1000 V FAST Fuse

Display: Digital: 6000 counts updates 4/sec; (Model 87 and 88 also has 19,999 counts in high-resolution mode).

Analog Bargraph: 33 segments, updates 40/sec. Frequency: 19,999 counts, updates 3/sec at > 10 Hz

Temperature: Operating: -20 °C to +55 °C; Storage: -40 °C to +60 °C

Altitude: Operating: 2000 m; Storage: 10,000 m

Temperature Coefficient: 0.05 x (specified accuracy)/ °C (< 18 °C or > 28 °C)

Electromagnetic Compatibility: In an RF field of 3 V/m total accuracy = specified accuracy + 20 counts

Except: 600 ∝A dc range total accuracy=specified accuracy + 60 counts. Temperature not specified.

Relative Humidity: 0 % to 90 % (0 °C to 35 °C); 0 % to 7 0% (35 °C to 55 °C)

Battery Type: 9 V zinc, NEDA 1604 or 6F22 or 006P

Battery Life: 400 hrs typical with alkaline battery (with backlight off)

Vibration: Per MIL-PRF-28800 for a Class 2 instrument

Shock: 1 Meter drop per IEC 61010-1:2001

Size (HxWxL): 1.25 in x 3.41 in x 7.35 in (3.1 cm x 8.6 cm x 18.6 cm)

Size with Holster and Flex-Stand:2.06 in x 3.86 in x 7.93 in (5.2 cm x 9.8 cm x 20.1 cm)

Weight: 12.5 oz (355 g)

Weight with Holster and Flex-Stand: 22.0 oz (624 g)

Safety: Complies with ANSI/ISA S82.01-2004, CSA 22.2 No. 1010.1:2004 to 1000 V Overvoltage Category III, IEC

4