Fluke 80 Series V manual Ma / Ua

80 Series V

Calibration Manual

Notes

Set the calibrator to Standby prior to changing the function switch position and or after completing adjustment of each function.

If the calibration adjustment procedure is not completed correctly, the Meter will not operate correctly.

Table 16. Calibration Adjustment Steps

Function		Adjustment		Input Value
	Input Terminal		Fluke 83-V and
(Switch Position)		Step			Fluke 87-V
			88-V
K	I	C-01	600.0 mV, 60 Hz		600.0 mV, 60 Hz
(AC Volts)		C-02	600.0 mV, 5 kHz		600.0 mV, 20 kHz
		C-03	6.000	V, 60 Hz	6.000	V, 60 Hz
		C-04	6.000	V, 5 kHz	6.000	V, 20 kHz
		C-05	60.00	V, 60 Hz	60.00	V, 60 Hz
		C-06	60.00	V, 5 kHz	60.00	V, 20 kHz
		C-07	600.0	V, 60 Hz	600.0	V, 60 Hz
		C-08	600.0	V, 5 kHz	600.0	V, 10 kHz
L		C-09	6.000	V	6.000	V
(DC Volts)		C-10	60.00	V	60.00	V
		C-11	600.0	V	600.0	V
mL		C-12	600.0 mV		600.0 mV
(DC Millivolts)		C-13	60.00 mV		60.00 mV
e		C-14	600.0		600.0
(Ohms)		C-15	6.000 k		6.000 k
		C-16	60.00 k		60.00 k
		C-17	600.0 k		600.0 k
		C-18	6.000	M	6.000	M
		C-19	0.000		0.000
		C-20	50.0 M		50.0 M
O		C-21	3.000	V	3.000	V
(Diode Test)
A	A	C-22	6.000	A, 60 Hz	6.000	A, 60 Hz
		C-23	6.000	A dc	6.000	A dc
(Amps)
mA	mA /UA	C-24	60.00 mA, 60 Hz		60.00 mA, 60 Hz
(Milliamps)		C-25	400.0 mA, 60 Hz		400.0 mA, 60 Hz
		C-26	60.00 mA dc		60.00 mA dc
		C-27	400.0 mA dc		400.0 mA dc
µA		C-28	600.0	∝A ac,	600.0	∝A ac, 60 Hz
			60 Hz
(Microamps)
		C-29	6000 ∝A, 60 Hz		6000 ∝A, 60 Hz
		C-30	600.0	∝A dc	600.0	∝A dc
		C-31	6000 ∝A dc		6000 ∝A dc

26