Fluke 80 Series V manual Cal

80 Series V

Calibration Manual

		Table 13. Display Features (cont.)
Number	Feature	Indication
		The battery is low. XWWarning: To avoid false readings, which could lead to
L	b	possible electric shock or personal injury, replace the battery as soon as the
		battery indicator appears.
M	A, ∝A, mA	Amperes (amps), Microamp, Milliamp
	V, mV	Volts, Millivolts
	∝F, nF	Microfarad, Nanofarad
	nS	Nanosiemens
	%	Percent. Used for duty cycle measurements.
	e, Me, ke	Ohm, Megohm, Kilohm
	Hz, kHz	Hertz, Kilohertz
	AC DC	Alternating current, direct current
N	°C, °F	Degrees Celsius, Degrees Fahrenheit
O	610000 mV	Displays selected range
P	HiRes	The Meter is in high resolution
		(Hi Res) mode. HiRes=19,999
	Auto	The Meter is in autorange mode and automatically selects the range with the
Q		best resolution.
	Manual	The Meter is in manual range mode.
R		The number of segments is relative to the full-scale value of the selected
		range. In normal operation 0 (zero) is on the left. The polarity indicator at the
		left of the graph indicates the polarity of the input. The graph does not operate
		with the capacitance, frequency counter functions, temperature, or peak min
		max. For more information, see “Bar Graph”. The bar graph also has a zoom
		function, as described under "Zoom Mode".
S	RPMon	oconventional (4 cycle) Counts every other revolution.
		nwaste spark of 2 cycle. Counts every revolution.
--	0L	Overload condition is detected.
		Error Messages
bAtt	Replace the battery immediately.
diSC	In the capacitance function, too much electrical charge is present on the capacitor being tested.
EEPr	Invalid EEPROM data. Have Meter serviced.
Err
CAL	Invalid calibration data. Calibrate Meter.
Err
LEAd	WTest lead alert. Displayed when the test leads are in the A or mA/∝A terminal and the selected
	rotary switch position does not correspond to the terminal being used.

16