Daily operation
Switching on/off
Turning on/off the power
Press aon the TV.
Switch it off by pressing aon the TV.
•However, please bear in mind that EPG data (electronic programme guide) will be lost, and programmed timer recordings will not be performed by the TV.
Standby mode
If the TV set is switched on, you can switch it to standby by pressing Bon the remote control.
Switching on from standby
From standby, press Bon the remote control or pressing any of the numeric buttons 0 - 9.
Or, switch on the TV set with OK, you can then see the station list and select a station.
Switching on the radio
From standby, press RADIO on the remote control.
TV indicator status
There are three indicators at the front of the TV. Refer to the table for each LED status.
Bindicator | Status | |
|
| |
Off | Power off | |
|
| |
Blue | Power on | |
|
| |
Red | Standby | |
|
| |
|
| |
STATUS | Status | |
indicator | ||
| ||
|
| |
Red | On Timer is programmed. | |
|
| |
Red flashing | Receiving remote control command | |
|
| |
Green | HDD recording timer is programmed. | |
|
| |
Green flashing | Receiving EPG data | |
|
| |
Orange | Both HDD recording timer and On Timer are | |
programmed. | ||
| ||
|
| |
|
| |
HDD indicator | Status | |
|
| |
Red | HDD recording in progress | |
|
| |
Green | Archive playback or Time Shift recording in progress | |
|
|
NOTE
•If you are not going to use this TV for a long period of time, be sure to remove the AC cord from the power outlet.
•Weak electric power is still consumed even when ais turned off.
Changing channels
With Pr/Ps:
Press Pr/Psto select channels.
•The station display with audio format displays briefly.
•If favourites are set, only the registered channels are selected with Pr/Ps. (Page 13)
•The symbols for the audio format is provided on page 13.
•If there are additional languages or DVB subtitles for DVB stations, its selections are shown under the station display. (Page 13)
With station list:
1Press OK with no other menu screen active. (If favourites list is displayed instead, press RED.)
Station list
EXT3
EXT5
EXT6
2Press a/b/c/d or 0 - 9 to select the desired channel in the station list, and then press OK to tune in.
•Press RED to go to the favourites list.
•Press BLUE to sort the list according to “alphabetical” or “numerical”.
•If sorted alphabetically, enter the initial letters with 0 - 9 like on a mobile phone keypad. The first station for the specified letters is marked.
To delete, restore, move, and rename stations from the station list
While in the station list, press YELLOW (Change stations).
EDelete
Select a station to delete, and then press RED (Delete). Mark more stations with a/b/c/d or 0 - 9, if desired. Confirm with OK or cancel with RED.
ERestore stations
To restore station(s) that you have already deleted, select a station to restore, and then press GREEN (Restore stations). Confirm with OK.
•The restored station is sorted according to its signal source at the end of the respective signal block.
EMove
Select a station to move, and then press YELLOW (Move). Mark more stations with a/ b/c/d or 0 - 9, if desired. Press OK to finish marking.
Press a/b/c/d or 0 - 9 to select the position to move to. Confirm with OK or cancel with
YELLOW.
•Make sure to select the appropriate block of channels or destination when moving.
ERename
Select a station to rename, and then press BLUE (Rename). Press any of the numeric buttons 0 - 9 to select the desired character. Remember to press and toggle the numeric button quickly, for the transition to the next digit is rather quick. Repeat until the new name is fully spelt out. Confirm with OK or cancel with BLUE.
•The name can be up to 9 characters.
•Available only in the analogue TV mode.
| With 0 - 9: |
|
12 | Press | 0 - 9 to select channels. |