Connecting external devices
Audio connection
Analogue audio:
Connect the analogue audio signal from the PC or the SetTopBox via stereo cable to the AUDIO IN (L/R) jack on the TV set.
•The sound is played via the speakers connected to the TV set or a speaker system.
Digital audio:
•An external digital audio signal can be reproduced via the integrated Dolby Digital Decoder or via an externally connected digital audio amplifier.
1 Connect the digital audio signal from the PC or the
2Then assign the digital audio input in “TV menu > Connections > Miscellaneous > Assign digital audio input”.
For an external digital audio amplifier:
1
2
Prerequisite: External audio amplifier is already connected. (Page 22)
Feed the digital audio signal of the DIGITAL AUDIO (OUT) socket on the TV set to the external amplifier.
Component connection (EXT3)
DVD players/recorders with component video connections can also be connected to EXT 3 (COMPONENT) of the TV set instead of to the SCART sockets.
The connecting cable with three cinch plugs transmits the picture information with better quality than a SCART cable. You need an additional cable for audio transmission.
The basic procedure of setting up a component connection (cable connection and audio connection) is the same as explained in the previous section, “VGA/ XGA connection (PC/SetTopBox)”, except:
When adjusting the parameters in “Signal type at socket EXT3”, select “Automatic” if you are not sure. Read the operation manual of the external device for other options.
17