HDD Digital Recorder operation
EDeleting programmed timer entries
1In the TV mode, press MENU to display the TV menu.
While viewing with Time Shift:
You want to interrupt a programme to answer a phone call, for example.
Press F.
2Select “Recording” with c/d and press b to move down.
3Select “Timer list” with a/b, and then press OK.
4Select the entry to delete with a/b.
5Press YELLOW (Delete), and confirm with OK.
• To abort the deletion, press YELLOW again.
Playback
•The TV picture freezes and the drive display appears.
•At the top you will see the number and name of the station if EPG or teletext data is available, in addition to the start and end of the current programme and the title of the programme.
•Before the bar you can see the start time for time shift recording. After the bar you can see the time at which the offset recorder will be full (automatically extends by 30 minutes, up to approx. 3 hours). The grey bar indicates how much of the available recording time has been used up. The time displayed inside the bar is the time at which the Fbutton was pressed.
EPlay
1Press RED to display the DR Archive.
DR archive | free capacity 48:42 hrs | ||||
|
|
|
|
|
|
SHARP Demo |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•You can switch between alphabetical and chronological sorting by pressing BLUE.
•The bar (on the right in the list) shows you how much of the recording has been watched. The bar is empty for recordings which have not been watched; recordings which have been watched entirely have a bar filled completely; partially watched recordings have a bar which is filled for the parts already watched.
•If other programme data is available from the EPG or teletext, it is shown below the archive list for the entry just marked. Other information about the recording can be displayed by pressing m, if available.
2Select a recording with a/b.
3Press OK to start playback.
EPause
1Freeze picture with F.
2To continue playback, press Ior press F again.
You want to carry on watching the programme at the end of the phone call.
Press Fagain or I.
•Now you will see the TV programme with a time shift from exactly the point in time you first pressed F. The Play symbol (I) appears in place of the Pause symbol (F).
EGo live (Time shift only)
Press H.
• You will then see the live picture of the programme.
ESmart jump
The Smart jump function is included to enable fast and easy access to a certain place within the programme. When Smart jump is switched on, the jump distance is cut in half after each change in the jump direction while jumping. By cutting the jump distance in half when changing the jump direction, you can estimate your way close to a particular section.
The playback symbol (I) is yellow when the Smart jump function is active.
For instance, you are looking for the beginning of a programme …
1Press Gseveral times to jump back
2If you have jumped past the beginning of the programme, jump in the opposite direction. Briefly press J.
3This jump in the opposite direction is only carried out for half the jump distance. Now jump forward using Juntil you see the beginning of the programme.
4If you have jumped past the beginning of the programme, jump back using G. In the process, the jump distance is cut in half again.
•The
48