Preparation
Attaching the stand unit
•Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
•Attach the stand in the correct direction.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1Confirm that there are 10 screws (6 short screws and 4 long screws) with the stand unit.
2Attach the supporting post for the stand unit onto the base using the box for the stand as shown.
Hex key | 3 |
Short screw 
2
31Insert the stand into the openings on the bottom of the TV. (Hold the stand so it will not drop from the edge of the base area.)
2Insert and tighten the 4 long screws into the 4 holes on the rear of the TV.
| Hex key |
2 | Long screw 2 |
| Soft |
| cushion |
1
1 
1
Detaching the stand unit
1
2
the
the holes on place.)
Removing the terminal cover
Before making any connections, remove the protective adhesive tape from the cover.
Then press down on the upper hooks and remove the rear terminal cover towards you.
4