Connecting external devices
HDMI connection |
| VGA/XGA connection (PC/ |
|
| SetTopBox) |
| ||
|
|
|
(Optional audio | (Optional audio |
connection) | connection) |
The HDMI connections (High Definition Multimedia Interface) permit digital video and audio transmission via a connection cable from a player.
The digital picture and sound data are transmitted without data compression and therefore lose none of their quality. Analogue/digital conversion is no longer necessary in the connected devices, which also would result in quality losses.
HDMI/DVI conversion
Using a DVI/HDMI adapter cable, the digital video signals of a DVD or PC can also be played via the compatible HDMI connection. The sound must be fed in additionally.
HDMI and DVI both use the same HDCP copy protection method.
Connecting the HDMI device
In “Connection wizard > AV equipment selection”, select “HDMI/DVI”, and connect the device accordingly.
•If an HDMI/DVI conversion cable is used, audio signals must be fed separately to either DIGITAL AUDIO (IN) or analogue AUDIO IN (L/R).
NOTE
•Video noise may occur depending on the type of HDMI cable used. Make sure to use a certified HDMI cable.
•When playing an HDMI image, the best possible format for the picture will be detected and set automatically.
Supported video signals:
VGA, 576i, 576p, 480i, 480p, 720p, 1080i, 1080p See page 18 for PC signal compatibility.
If a connected HDMI device is AQUOS LINK compatible, you can take advantage of versatile functions using the AQUOS LINK buttons on the remote control.
See pages 19 - 22 for details.
You can connect a PC or a SetTopBox (STB) to the EXT 7 (ANALOG RGB) terminal and thus use the screen of the TV set as an output device.
When connecting the PC, set the PC’s output resolutions according to the capabilities of the PC. For details, see page 18 for PC signal compatibility.
When connecting a SetTopBox, set the following screen resolutions according to the capabilities of the SetTopBox:
Supported video signals (for STB): 576i, 576p, 480i, 480p, 720p, 1080i
Connecting
Connect the device to EXT 7 via the VGA cable. See page 22 for the sound connection.
Registration in the connection wizard is not necessary.
Adjusting the geometry
Using this function, you can adjust the horizontal/ vertical position of the picture. (Page 38)
Setting the colour standard
1Press MENU and the TV menu screen displays.
2Press c/d to select “Picture”, and then press b to move down.
3Press a/b to select “Colour standard”, and then press b to move down.
4Press c/d to select “RGB” for PC, and “Ycc” (in rare cases, “Ypp” or “RGB”) for STB, and then press OK.
16