Sharp LC-46HD1E Using EPG menu, Press EPG Press Menu, Station markings according to reception

Other features

Using EPG menu

1

2

Press EPG.

Press MENU.

EPG menu

Station selection
Data capture	on (for DVB + analogue)

Items	Description
	In analogue TV reception, there are possibly
	different providers who broadcast the EPG
	data for certain station packages. To get
	another range of stations, you can change
Select provider	the provider with the “Select provider”. If the
	provider you are looking for is not in the list,
	then press YELLOW to perform a Provider
	search.
	The stations offered by the provider will be
	displayed in a list.
	You can remove certain stations from the
	programme guide. These stations must be
	deactivated in the station selection. First, all
	stations for which programme information can
	be provided are marked with a ✔ . Stations
	without a ✔ are not included in the programme
Station selection	guide.
	Station markings according to reception
	ranges:
	E: analogue stations via antenna/cable, for
	which the current provider supplies data.
	T: digital terrestrial stations DVB-T,
	C: digital cable stations DVB-C,
	S: digital satellite stations DVB-S1/S2.
	If you want to use EPG for analogue and digital
	stations, select “on” (for DVB + analogue).
	If you want to use EPG and only have DVB
	reception, select “on” (only for DVB). If you are
	not using EPG and therefore do not want to
	receive any EPG data, select “off”.
	After making changes in the EPG menu,
	or each time the power switch has been
	switched off, the EPG data must be captured.
	To do this, switch on the device and select
Data capture	(for analog stations) the station that you have
	defined as the provider, and let the TV set run
	for about 1 hour with the selected station. Or
	switch the TV set to standby mode. After 2
	minutes the display on the TV glows orange
	and the EPG data capture begins. When
	the data capture process has concluded the
	display will return to red. The data capture
	process is usually performed between 2:00 am
	and 5:00 am, when the TV set is in standby
	mode.

27