Sharp LC-46HD1E, LC-52HD1E operation manual Depending on the selected channel and country

Search for DVB-T stations one after another and compare values for C/N and Level.

Then position/align the antenna to the weakest station so that maximum values for C/N and Level are obtained.

6 Thereafter perform an automatic search for all DVB-T stations.

Press BLUE to start search.

5

• The signal source is already on DVB-T due to the station preselection.

4 Position and align the antenna in such a manner that maximum values for C/N and Level are obtained.

C/N 96

Level 99

Name

12 Test

Bandwidth

7 MHz

Frequency

177.50 MHz

Channel

E05

Signal source

Antenna/cable (analogue) DVB-TDVB-CDVB-S

Initial installation

Positioning/aligning DVB-T antenna

If you are receiving one or more DVB-T stations with picture and sound interference then you should change the installation location and alignment of the antenna. Ask your dealer to tell you which channels are used to broadcast the DVB-T stations in your region.

Prerequisite: In normal TV mode, with no other menu screen active, and a DVB-T station is received and selected.

1 Press MENU and the TV menu screen displays.

2 Press c/d to select “Setup”, and then press OK.

3 Press a/b to select “Stations”, and then press OK.

Press a/b to select “Manual tune”, and then press OK.

TV menu -> Setup -> Stations

Manual tune Change stations Select/change favourites Search wizard

Item	Explanation
	Depending on the selected channel and country
Bandwidth	the associated bandwidth of 7 or 8 MHz will be set
	automatically.

11