Sharp LC-46HD1E, LC-52HD1E Connection wizard, Connecting external devices, Default screen

Connecting external devices

Connection wizard

The integrated Connection wizard shows you which terminal you should connect your equipment to. Connect the equipment according to the diagram and follow the messages one after the other.

NOTE

•New devices should not be connected until they have been registered in the connection wizard.

1Press MENU and the TV menu screen displays.

2Press c/d to select “Connections”, and then press b to move down.

3Press a/b to select “AV setup”, and then press OK.

• The connection wizard screen displays.

4Press OK. The screen shows a default screen, which may differ from the actual connection. Press OK to proceed.

Default screen

AV setup

Connection wizard

Now the TV set assumes that you have connected the following equipment:

EXT4 EXT1 EXT2 EXT3 EXT5 EXT6

5The AV equipment selection screen opens. Select device(s) to connect with a/b, and then press YELLOW to mark. A marked device is indicated with ✔. For example, if connecting DVD recorder with HDMI terminal to the TV, select “HDMI/DVI” and then press YELLOW to register. You can connect other devices in the same way.

AV setup -> AV equipment selection

DVD	DVD player
DVD •	DVD recorder
VCR	Video recorder
SAT	Satellite receiver
STB	SetTopBox/dBox
Decoder	Decoder
Camera	Camcorder/camera
AV	Other device(s) to EXT1/2/4
COMP.IN	Device to EXT3
HDMI/DVI	Device to EXT5
HDMI/DVI	Device to EXT6

Connection wizard

Specify all new AV devices to be connected and all connection changes to the existing devices here.

6Next, the connection diagram shows how to connect the new or preset devices to the rear terminals. Press OK to proceed.

•If you specify a decoder for connection, you will be directed to “Select decoder station(s)” submenu.

7Specify the signal type for the terminal. If you are not sure, select the automatic setting.

8Follow the instructions on the screen for the rest of the process.

Items	Explanation
	The signal type of the devices that can be
	connected can vary greatly. If you are not sure,
Connections	leave the setting for “Signal” on “Automatic
and signal	CVBS/YC” (e.g. for DVD Player/Recorder) or
	“Autom.-VHS/SVHS” (e.g. VCR), otherwise select
	the right signal type.
	If the picture from a connected device is to be
	displayed immediately on the TV set during
	playback, select “yes”. A switching voltage is
	allowed so that you do not have to switch over
Immediate	manually to see the picture of the connected
playback	device. (See the operating manual for the
	connected reproduction device.)
	When playing from AV Link devices, the picture is
	always displayed immediately, regardless of the
	setting.
	Select the AV socket to which the device of
	which you want to hear the digital sound is
Assign digital	connected. Connect the digital output of the
audio input	external device to the digital input of the TV set.
	(Page 22) If a device with digital audio is not
	connected then select “no”.

15