Sony SLV-AV100UX Taking advantage of the sound fields, Sound Field Operations

Page 61

Sound Field Operations

You can enjoy the surround sound effect by simply selecting one of the pre-programmed sound fields according to the type of playback source.

Taking advantage of the sound fields

Selecting the sound field

1Select the input source.

2Select the sound field. (See “Using the pre-programmed sound fields” on page 34.)

You can set the sound effect independently for each input source.

Select

To

You need the following speakers

 

 

 

PROLOGIC

Fully enjoy programmes processed with Dolby Pro Logic

See “Selecting the centre mode” on page 18.

 

Surround sound (See “What’s Dolby Surround and Dolby Pro

 

 

Logic Surround?” on the next page.)

 

 

 

 

THEATRE

Add the acoustic reflections of a theatre to the decoded Dolby

See “Selecting the centre mode” on page 18.

 

Surround signals (See “What’s Dolby Surround and Dolby

 

 

Pro Logic Surround?” on the next page.)

 

MONO MOVIE

Create a theatre-like environment for movies with monaural

 

soundtracks (See “What’s surround sound?” on the next

 

page.)

The surround (rear left and right) speakers as well as the front left and right speakers

HALL

Reproduce the acoustics of a hall (See “What’s surround

The surround (rear left and right) speakers as

 

sound?” on the next page.)

well as the front left and right speakers

 

 

 

STADIUM

Reproduce the feeling of a large open-air stadium (See

The surround (rear left and right) speakers as

 

“What’s surround sound?” on the next page.)

well as the front left and right speakers

 

 

 

GAME

Obtain maximum audio impact from video game software

The surround (rear left and right) speakers as

 

(See “What’s surround sound?” on the next page.)

well as the front left and right speakers

 

 

 

ACOUSTIC

Reproduce normal 2 channel stereo

Only the front left and right speakers

 

 

 

OFF

Turn off the sound effect

Only the front left and right speakers

 

 

 

To temporarily turn off the sound effect you set

1Select the input source for the sound effect you want to turn off.

2Press SURROUND on the unit to turn off the sound effect.

To resume the previous sound effect, press SURROUND again.

continued

Sound Field Operations

61

Image 61
Contents Amplifier Integrated Video Cassette Recorder Safety PrecautionsInstalling Compatible colour systemsTable of contents Step Inserting the batteries Using the remote commanderGetting Started Unit and the EURO-AV Scart connector On the TV Aerial input on your TV usingBefore you connect Disconnect the aerial cable from yourIf your TV doesn’t have a EURO-AV Scart connector Connecting speaker systems Listening through the headphones Connecting an active wooferSpeakers Rear L/R connectors Placing the speakersConnecting various audio/video equipment Connect the mains lead to the mains Supplied Conserving power while the unit is standing byPress ON/STANDBY to turn on the unit To check that the TV tuning is correctPress RF Channel on the unit Turn on your TV and select a programme positionPress VHS Tuner to turn on the unit and TV Press Easy SET UP on the unitSet the TV for VCR reception Preset automatically, change the programme Lift the top cover of the remote commanderPositions of the stations, and disable the unused Programme positions. If all the settings arePress ?// to select the centre mode Setting up the unit with Easy SET UPHave an equal volume balance with the other Decrease the volume of the centre speaker so youVolume of the rear speakers so you have an Equal volume balance with the other speakers atIf you have only front and centre speakers If you have only front and rear speakersBefore you start… Manual setup Presetting channelsManual setup Presetting channels If the picture is not clear Disabling unwanted programme positionsManual setup Selecting station names/setting up Video Plus+ Press Cursor / to highlight the guide channel column only Guide Station name Channel Setting up Video Plus+ for satellite broadcasts Changing programme positions Manual setup -- Changing/disabling programme positionsITV BBC1 BBC2 CH4 Select Manual setup -- Changing/ disabling programme positions Setting the clock manually Manual setup Setting the clockManual setup Setting the clock Changing the station for Auto Clock Set Basic VCR Operations Playing a video tapeTo change the information in the display window To use the time counterTo mute the sound Fields Using the pre- programmed soundPress r REC to start recording To stop recording Recording TV programmesTo check the remaining tape length To watch another TV programme while recordingTo save a recording Recording TV programmesRecording TV programmes using Video Plus+ To record satellite broadcasts Recording TV programmes using Video Plus+Using the unit after setting the timer Setting the timer manually Press Cursor / to confirm the setting Timer recording with PDC signalsPress Execute Press Timer REC ON/OFF Daily/weekly recordingChecking/changing/ cancelling timer settings When the timer settings overlap Audio/Video Equipment Operations Selecting the equipmentControlling the function buttons Before operating audio/video equipment Watching a picture while listening to audio equipmentFunction buttons on the unit Function To turn off the whole system To increase or decrease the volumeControlling VCRs Controlling VCRs which have the Command Mode selectorTurning on and controlling the unit’s VCR To relate VIDEO1 or VIDEO2 with Command Mode again Using the remote commander buttons to control the other VCRControlling VCRs Turning on and controlling another VCR Turning off the selected VCRControlling the TV Turning off the TV Controlling the TV Using the TV independentlyTo select the TV’s input source To scan preset stations Listening to preset radio programmesTo scan the preset stations Listening to a radio programmeTo locate a track with the number buttons Playing back a CDPlaying a tape Controlling a cassette deckRecording on a tape Controlling a cassette deck Controlling a DAT deck Customizing the remote commander for a DAT deckControlling a DAT deck Controlling an MD deck Customizing the remote commander for an MD deckPlaying an MD Recording on an MD Controlling an MD deckControlling an LD player Customizing the remote commander for an LD playerPlaying back an LD To start playback from the beginning of either LD sideTurning off the LD player Controlling an LD playerSound Field Operations Taking advantage of the sound fieldsSelecting the sound field To temporarily turn off the sound effect you setWhat’s Dolby Surround and Dolby Pro Logic Surround? Taking advantage of the sound fieldsWhat’s surround sound? Getting the most out of Dolby Pro Logic Surround sound Adjusting the delay timeCustomizing the sound fields To start your adjustment from a flat equalizer curve Adjusting the tone for all sound fieldsTo return to the previous menu Press Cursor /. to move the cursor I to Tone EditSource, then repeat steps Start playing a programmeHighlight Effect Press EXECUTE, then press CursorReinforcing the bass sound for all sound fields Source, then repeat steps Through 4 in Using the preSound fields in step Reconfiguring the Prologic and Theatre sound fields Increasing the maximum rear speaker level Playing/searching at various speeds Using the Click Shuttle ringAdvanced VCR Operations To extend the duration Recording TV programmes using the quick timerNicam system Recording stereo and bilingual programmesTo select the sound while recording How sound is recorded on a video tape To stop searching Searching using the index functionAdjusting the tracking Adjusting the pictureAbout Optimum Picture Control OPC Menu choices Changing menu optionsEditing Recording from another VCR or LD playerBefore you start editing Before you start dubbing… Audio dubbingTo listen to both the hi-fi and normal audio To stop while editingTo restore the factory settings for VIDEO1 or VIDEO2 Customizing the remote commander function buttonsAdditional Information Factory set functionsSymptoms caused by contaminated video heads TroubleshootingTroubleshooting Remote commander does System Amplifier General SpecificationsVCR Inputs and outputs Front panel Index to parts and controlsFront panel, with cover opened Display window Rear panel Index to parts and controls Remote commander Remote commander, with top cover opened Y, Z Index