Sony SLV-AV100UX operating instructions Audio dubbing, Before you start dubbing…

Page 78

Audio dubbing

COUNTER	AUDIO P PAUSE	AUDIO
RESET	DUB	AUDIO

This feature lets you record over the normal audio track. The monaural sound previously recorded is replaced while the original hi-fi sound remains unchanged. Use this feature to add music to a tape you have recorded with a camcorder.

Before you start dubbing…

•Press VHS TUNER.

–If the TV doesn’t turn on, turn it on manually.

Press VHS TUNER again if connected with a EURO-AV (Scart) cable.

–If connected with a EURO-AV (Scart) cable, the TV is automatically set to VCR reception.

–If connected with only the antenna cable, set the TV to the VCR’s programme position manually.

•Do not use the remote commander in the following procedure.

1 Insert a prerecorded tape with its safety tab in place into this (recording) VCR.

Search for the end of the section to be dubbed and press P PAUSE.

2 Press COUNTER RESET on this unit to reset the counter to “0H00M00S.”

3 Rewind the prerecorded tape to the beginning of the section to be dubbed.

The unit’s VCR pauses.

4 Insert a source tape, MD, CD, etc. into the playback component connected to the unit.

5 Press AUDIO repeatedly to select the input (playback) source.

6 Search for the point to start playback and set it to playback pause.

7 Press AUDIO DUB.

The audio dubbing indicator appears in the display window.

78

Editing

Image 78

Contents Amplifier Integrated Video Cassette Recorder Installing PrecautionsSafety Compatible colour systemsTable of contents Step Using the remote commander Inserting the batteriesGetting Started Before you connect Aerial input on your TV usingUnit and the EURO-AV Scart connector On the TV Disconnect the aerial cable from yourIf your TV doesn’t have a EURO-AV Scart connector Connecting speaker systems Speakers Rear L/R connectors Connecting an active wooferListening through the headphones Placing the speakersConnecting various audio/video equipment Connect the mains lead to the mains Conserving power while the unit is standing by SuppliedPress RF Channel on the unit To check that the TV tuning is correctPress ON/STANDBY to turn on the unit Turn on your TV and select a programme positionPress Easy SET UP on the unit Press VHS Tuner to turn on the unit and TVSet the TV for VCR reception Positions of the stations, and disable the unused Lift the top cover of the remote commanderPreset automatically, change the programme Programme positions. If all the settings areSetting up the unit with Easy SET UP Press ?// to select the centre modeVolume of the rear speakers so you have an Decrease the volume of the centre speaker so youHave an equal volume balance with the other Equal volume balance with the other speakers atIf you have only front and rear speakers If you have only front and centre speakersManual setup Presetting channels Before you start…Manual setup Presetting channels Disabling unwanted programme positions If the picture is not clearManual setup Selecting station names/setting up Video Plus+ Press Cursor / to highlight the guide channel column only Guide Station name Channel Setting up Video Plus+ for satellite broadcasts Manual setup -- Changing/disabling programme positions Changing programme positionsITV BBC1 BBC2 CH4 Select Manual setup -- Changing/ disabling programme positions Manual setup Setting the clock Setting the clock manuallyManual setup Setting the clock Changing the station for Auto Clock Set Playing a video tape Basic VCR OperationsTo use the time counter To change the information in the display windowTo mute the sound Using the pre- programmed sound FieldsTo check the remaining tape length Recording TV programmesPress r REC to start recording To stop recording To watch another TV programme while recordingRecording TV programmes To save a recordingRecording TV programmes using Video Plus+ Recording TV programmes using Video Plus+ To record satellite broadcastsUsing the unit after setting the timer Setting the timer manually Press Execute Press Timer REC ON/OFF Timer recording with PDC signalsPress Cursor / to confirm the setting Daily/weekly recordingChecking/changing/ cancelling timer settings When the timer settings overlap Selecting the equipment Audio/Video Equipment OperationsControlling the function buttons Watching a picture while listening to audio equipment Before operating audio/video equipmentFunction buttons on the unit Function To increase or decrease the volume To turn off the whole systemControlling VCRs which have the Command Mode selector Controlling VCRsTurning on and controlling the unit’s VCR Controlling VCRs Turning on and controlling another VCR Using the remote commander buttons to control the other VCRTo relate VIDEO1 or VIDEO2 with Command Mode again Turning off the selected VCRControlling the TV Controlling the TV Using the TV independently Turning off the TVTo select the TV’s input source To scan the preset stations Listening to preset radio programmesTo scan preset stations Listening to a radio programmePlaying back a CD To locate a track with the number buttonsControlling a cassette deck Playing a tapeRecording on a tape Controlling a cassette deck Customizing the remote commander for a DAT deck Controlling a DAT deckControlling a DAT deck Customizing the remote commander for an MD deck Controlling an MD deckPlaying an MD Controlling an MD deck Recording on an MDPlaying back an LD Customizing the remote commander for an LD playerControlling an LD player To start playback from the beginning of either LD sideControlling an LD player Turning off the LD playerSelecting the sound field Taking advantage of the sound fieldsSound Field Operations To temporarily turn off the sound effect you setTaking advantage of the sound fields What’s Dolby Surround and Dolby Pro Logic Surround?What’s surround sound? Adjusting the delay time Getting the most out of Dolby Pro Logic Surround soundCustomizing the sound fields To return to the previous menu Adjusting the tone for all sound fieldsTo start your adjustment from a flat equalizer curve Press Cursor /. to move the cursor I to Tone EditHighlight Effect Start playing a programmeSource, then repeat steps Press EXECUTE, then press CursorSource, then repeat steps Through 4 in Using the pre Reinforcing the bass sound for all sound fieldsSound fields in step Reconfiguring the Prologic and Theatre sound fields Increasing the maximum rear speaker level Using the Click Shuttle ring Playing/searching at various speedsAdvanced VCR Operations Recording TV programmes using the quick timer To extend the durationRecording stereo and bilingual programmes Nicam systemTo select the sound while recording How sound is recorded on a video tape Searching using the index function To stop searchingAdjusting the picture Adjusting the trackingAbout Optimum Picture Control OPC Changing menu options Menu choicesRecording from another VCR or LD player EditingBefore you start editing Audio dubbing Before you start dubbing…To stop while editing To listen to both the hi-fi and normal audioAdditional Information Customizing the remote commander function buttonsTo restore the factory settings for VIDEO1 or VIDEO2 Factory set functionsTroubleshooting Symptoms caused by contaminated video headsTroubleshooting Remote commander does Specifications System Amplifier GeneralVCR Inputs and outputs Index to parts and controls Front panelFront panel, with cover opened Display window Rear panel Index to parts and controls Remote commander Remote commander, with top cover opened Index Y, Z