Sony SLV-AV100UX operating instructions Reconfiguring the Prologic and Theatre sound fields

Reconfiguring the PROLOGIC and THEATRE sound fields

MENU

EXECUTE

CURSOR

> / . / ? / /

If you change your speaker configuration, you need to readjust the centre mode and speaker levels for the PROLOGIC and THEATRE sound fields.

1 Repeat steps 1 through 4 in
	SOUND SET
“Using the pre-programmed	SOUND FIELD					PRO LOGIC
	BASS BOOST				ON		OFF
sound fields” on page 34 and	TONE EDIT
	SUR EDIT				LEVEL		DELAY
	CENTRE MODE
select PROLOGIC or THEATRE in	TEST TONE
	SELECT	:
step 3.	SET	:		,	EXECUTE
	EXIT	:	MENU

2 Press CURSOR >/. to move the	CENTRE MODE SET
cursor (I) to CENTRE MODE, then
press EXECUTE.	C MODE		NORMAL
	RETURN
	SELECT	:
	SET	:
	EXIT	:	MENU
3 Press CURSOR ?// to select the	CENTRE MODE SET
centre mode, then press CURSOR
. to highlight RETURN.	C MODE		WIDE
See “Selecting the centre mode” on page	RETURN
	SELECT	:
18.	SET	:	EXECUTE
	EXIT	:	MENU

4 Press EXECUTE, then press CURSOR
	SOUND SET
>/. to highlight TEST TONE.	SOUND FIELD				PRO LOGIC
	BASS BOOST			ON		OFF
	TONE EDIT
	SUR EDIT			LEVEL		DELAY
	CENTRE MODE
	TEST TONE
	SELECT	:
	SET	:	EXECUTE
	EXIT	:	MENU

5 Press EXECUTE.

Each speaker emits the test tone in turn (the speaker emitting the test tone is indicated by the red speaker mark).

Check each speaker’s relative volume balance with the test tones.

SUR EDIT LEVEL

CENTRE	+ 8 dB
REAR	+ 10 dB
RETURN	TEST TONE

SELECT	:
SET	:
EXIT	:	MENU

Tip

•To adjust the relative volume balance between the front left and right speakers, use BALANCE L/R on the unit.

6 Press CURSOR ?// to increase or decrease the volume of the centre speaker.

If you selected PHANTOM in step 3, skip this step.

For PROLOGIC sound, you should have an equal volume balance with the other speakers at your listening position.

For THEATRE sound, you can adjust the speaker level as you like.

SUR EDIT LEVEL

CENTRE	+ 10 dB
REAR	+ 10 dB
RETURN	TEST TONE

SELECT	:
SET	:
EXIT	:	MENU

68

Sound Field Operations