Sony SLV-AV100UX Adjusting the tone for all sound fields, To return to the previous menu

Page 65

To return to the previous menu

Select RETURN instead of pressing MENU in step 5, then press

EXECUTE.

Adjusting the tone for all sound fields

Adjust the tone of the front, centre and rear speakers for optimum sound. You can adjust the tone for all sounds fields, including

PROLOGIC.

1 Start playing a programme source, then repeat steps 1 through 4 in “Using the pre- programmed sound fields” on page 34 and select one of the sound fields in step 3.


	SOUND SET
	SOUND FIELD					THEATRE
	BASS BOOST				ON		OFF
	TONE EDIT
	SUR EDIT				LEVEL		EFFECT
	CENTRE MODE
	SELECT	:
	SELECT	:
	SET	:		,	EXECUTE
	EXIT	:	MENU

2 Press CURSOR >/. to move the cursor (I) to TONE EDIT.

SOUND SET

SOUND FIELD				THEATRE
BASS BOOST			ON			OFF
TONE EDIT
SUR EDIT			LEVEL			EFFECT
CENTRE MODE
SELECT	:
SELECT	:
SET	:	EXECUTE
EXIT	:	MENU

3 Press EXECUTE. Then, press CURSOR >/. to move the cursor (I) to BASS, and press CURSOR ?// to adjust the level of the low frequencies as you like.

TONE EDIT
BASS		+4 dB
TREBLE		0 dB +10
FLAT
RETURN		–10
SELECT	:
SET	:
EXIT	:	MENU

4 Press CURSOR >/. to move the cursor (I) to TREBLE, then press CURSOR ?// to adjust the level of the high frequencies as you like.

TONE EDIT
BASS		+ 4 dB
TREBLE		– 2 dB +10
FLAT
RETURN		–10
SELECT	:
SET	:
EXIT	:	MENU

5 Press MENU to return to the original screen.

To return to the previous menu

Select RETURN instead of pressing MENU in step 5, then press

EXECUTE.

To start your adjustment from a flat equalizer curve

Select FLAT after pressing EXECUTE in step 3 above, then adjust BASS and TREBLE.

continued

Sound Field Operations

65

Image 65

Contents Amplifier Integrated Video Cassette Recorder Safety PrecautionsInstalling Compatible colour systemsTable of contents Step Getting Started Using the remote commanderInserting the batteries Unit and the EURO-AV Scart connector On the TV Aerial input on your TV usingBefore you connect Disconnect the aerial cable from yourIf your TV doesn’t have a EURO-AV Scart connector Connecting speaker systems Listening through the headphones Connecting an active wooferSpeakers Rear L/R connectors Placing the speakersConnecting various audio/video equipment Connect the mains lead to the mains Supplied Conserving power while the unit is standing byPress ON/STANDBY to turn on the unit To check that the TV tuning is correctPress RF Channel on the unit Turn on your TV and select a programme positionSet the TV for VCR reception Press Easy SET UP on the unitPress VHS Tuner to turn on the unit and TV Preset automatically, change the programme Lift the top cover of the remote commanderPositions of the stations, and disable the unused Programme positions. If all the settings arePress ?// to select the centre mode Setting up the unit with Easy SET UPHave an equal volume balance with the other Decrease the volume of the centre speaker so youVolume of the rear speakers so you have an Equal volume balance with the other speakers atIf you have only front and centre speakers If you have only front and rear speakersBefore you start… Manual setup Presetting channelsManual setup Presetting channels If the picture is not clear Disabling unwanted programme positionsManual setup Selecting station names/setting up Video Plus+ Press Cursor / to highlight the guide channel column only Guide Station name Channel Setting up Video Plus+ for satellite broadcasts Changing programme positions Manual setup -- Changing/disabling programme positionsITV BBC1 BBC2 CH4 Select Manual setup -- Changing/ disabling programme positions Setting the clock manually Manual setup Setting the clockManual setup Setting the clock Changing the station for Auto Clock Set Basic VCR Operations Playing a video tapeTo mute the sound To use the time counterTo change the information in the display window Fields Using the pre- programmed soundPress r REC to start recording To stop recording Recording TV programmesTo check the remaining tape length To watch another TV programme while recordingTo save a recording Recording TV programmesRecording TV programmes using Video Plus+ To record satellite broadcasts Recording TV programmes using Video Plus+Using the unit after setting the timer Setting the timer manually Press Cursor / to confirm the setting Timer recording with PDC signalsPress Execute Press Timer REC ON/OFF Daily/weekly recordingChecking/changing/ cancelling timer settings When the timer settings overlap Controlling the function buttons Selecting the equipmentAudio/Video Equipment Operations Function buttons on the unit Function Watching a picture while listening to audio equipmentBefore operating audio/video equipment To turn off the whole system To increase or decrease the volumeTurning on and controlling the unit’s VCR Controlling VCRs which have the Command Mode selectorControlling VCRs To relate VIDEO1 or VIDEO2 with Command Mode again Using the remote commander buttons to control the other VCRControlling VCRs Turning on and controlling another VCR Turning off the selected VCRControlling the TV To select the TV’s input source Controlling the TV Using the TV independentlyTurning off the TV To scan preset stations Listening to preset radio programmesTo scan the preset stations Listening to a radio programmeTo locate a track with the number buttons Playing back a CDRecording on a tape Controlling a cassette deckPlaying a tape Controlling a cassette deck Controlling a DAT deck Customizing the remote commander for a DAT deckControlling a DAT deck Playing an MD Customizing the remote commander for an MD deckControlling an MD deck Recording on an MD Controlling an MD deckControlling an LD player Customizing the remote commander for an LD playerPlaying back an LD To start playback from the beginning of either LD sideTurning off the LD player Controlling an LD playerSound Field Operations Taking advantage of the sound fieldsSelecting the sound field To temporarily turn off the sound effect you set What’s surround sound? Taking advantage of the sound fields What’s Dolby Surround and Dolby Pro Logic Surround? Getting the most out of Dolby Pro Logic Surround sound Adjusting the delay timeCustomizing the sound fields To start your adjustment from a flat equalizer curve Adjusting the tone for all sound fieldsTo return to the previous menu Press Cursor /. to move the cursor I to Tone EditSource, then repeat steps Start playing a programmeHighlight Effect Press EXECUTE, then press CursorSound fields in step Source, then repeat steps Through 4 in Using the preReinforcing the bass sound for all sound fields Reconfiguring the Prologic and Theatre sound fields Increasing the maximum rear speaker level Advanced VCR Operations Using the Click Shuttle ringPlaying/searching at various speeds To extend the duration Recording TV programmes using the quick timerTo select the sound while recording Recording stereo and bilingual programmesNicam system How sound is recorded on a video tape To stop searching Searching using the index functionAbout Optimum Picture Control OPC Adjusting the pictureAdjusting the tracking Menu choices Changing menu optionsBefore you start editing Recording from another VCR or LD playerEditing Before you start dubbing… Audio dubbingTo listen to both the hi-fi and normal audio To stop while editingTo restore the factory settings for VIDEO1 or VIDEO2 Customizing the remote commander function buttonsAdditional Information Factory set functionsSymptoms caused by contaminated video heads TroubleshootingTroubleshooting Remote commander does VCR Inputs and outputs SpecificationsSystem Amplifier General Front panel Index to parts and controlsFront panel, with cover opened Display window Rear panel Index to parts and controls Remote commander Remote commander, with top cover opened Y, Z Index