Sylvania 6626LDG 5HDMI Audio, Use K/L to select New Password, then press, Confirm password

OPERATING TV

C. New Password	5HDMI AUDIO
	Set the method of sound input for HDMI jack.

5Use [K/L] to select “New Password”, then press

[ENTER].

	V-Chipip
	EXIT
or	MPAA Rating
	PICTURE
	TV Rating

CHANNEL New Password

DETAIL

LANGUAGE

DVD

6Press [the Number buttons] on the remote control to enter the new 4-digit password.

• Enter password again in “Confirm password.” space.

EXIT	V-Chipip
PICTURE	Enter password.
CHANNEL	Confirm password.
DETAIL
LANGUAGE
DVD	PIN Code	BACK
		Back

7To exit the setup, press [SETUP].

1Press [SETUP] to display the setup screen.

EXIT

PICTURE

CHANNEL

DETAIL

LANGUAGE

DVD

2Use [K/L] to select “DETAIL”, then press [ENTER].

or

3Use [K/L] to select “HDMI Audio“, then press [ENTER].

	EXIT	Detailil
		Closed Caption
or	PICTURE	V–chip
		HDMI Audio	Auto
	CHANNEL

DETAIL

LANGUAGE

DVD

NOTE:

•Make sure to enter the exact same new password as the “Confirm password.”. If they are different, the space is cleared for reentering.

•Your password will be erased and return to the default (0000) when a power failure occurs or when you turn off the power using a wall switch. If you forget the password, unplug the power cord for 10 seconds to restore the pass- word to 0000.

3Use [K/L] to select the desired HDMI audio setting,

then press [ENTER].

	EXIT	Detailil
		Closed Caption
or	PICTURE	V–chip
		HDMI Audio	Auto
	CHANNEL
			Digital
	DETAIL		Analog
	LANGUAGE
	DVD

• Select “Auto” if you connected to both digital device with HDMI jack and analog device for audio sources. Digital audio input signal has priority in this setting.

• Select “Digital” if you connected to digital device with HDMI jack for digital audio input signal.

• Select “Analog” if you connected to analog device with analog jacks for analog audio input signal.

4 To exit the setup, press [SETUP].

28

EN