Sylvania 6626LDG owner manual 5DVD Audio Setting

5DVD AUDIO SETTING

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs.

1Press [SETUP] to display the setup screen.

EXIT

PICTURE

CHANNEL

DETAIL

LANGUAGE

DVD

2Use [K/L] to select “DVD”, then press [ENTER].

	EXIT	Setup
or	PICTURE	Press “ENTER” key to move to DVD Setup.

CHANNEL

DETAIL

LANGUAGE

DVD

3 Use [s / B] to select “	“, then press [ENTER].
or	AUDIO
	DRC	ON
	DOWN SAMPLING	ON
	DOLBY DIGITAL	BITSTREAM
ENTER

4Use [K/L] to select the desired item, then press [ENTER].

or	AUDIO
	DRC	ON
	DOWN SAMPLING	ON
	DOLBY DIGITAL	BITSTREAM
	ENTER

5 Use [K/L] to select the desired item, then press			INTRODUCTION
[ENTER].			PREPARATION
[DRC]		(Default: ON)
Sets the Dynamic Range Control.
This function is available only on the discs which are
recorded in the Dolby Digital format.
or	AUDIO		SETTINGTV
	DRC	ON
	DOWN SAMPLING	ON
	DOLBY DIGITAL	BITSTREAM
	ENTER
ON : Compress the range between soft and loud
sounds.
OFF : No effects (original sound).			OPERATING
This function is available only on digital outputting of a
[DOWN SAMPLING]		(Default: ON)
disc recorded in 96kHz.			TV
or	AUDIO		OPERATINGDVD
	DRC	ON
	DOWN SAMPLING	ON
	DOLBY DIGITAL	BITSTREAM
	ENTER
ON : When outputting in 48kHz.
OFF : When outputting the original sound.			SETTING
NOTE:
• When playing back a 96 kHz disc with the copyright protec-
tion or when Virtual Surround is set to 1 or 2, the sound will			DVD
be down sampled at 48 kHz and output as digital audio even
if the “DOWN SAMPLING” is set to “OFF”.
[DOLBY DIGITAL]		(Default: BITSTREAM)	TROUBLESHOOTING
Sets “BITSTREAM“ when this unit is connected to a
Dolby Digital decoder.
or	AUDIO
	DRC	ON
	DOWN SAMPLING	ON	INFORMATION
	DOLBY DIGITAL	BITSTREAM
	ENTER
BITSTREAM	: Outputs Dolby Digital signals.
PCM	: Converts the Dolby Digital into PCM.
	(2 channel)

6 To exit the setup, press [SETUP]. ESPAÑOL

41

EN