Sylvania 6900DTD owner manual Symptom Remedy, No sound, Audio problems when, Using coaxial digital

Appendix

Symptom	Remedy
	• Make sure that the audio cable is correctly connected.
	• Make sure that audio devices (stereo, TV, decoder) are turned on.
	• Make sure that audio devices (stereo, decoder) are correctly set to STB audio
	output channel.
No sound	• Check the audio cable. Either a standard audio cable or a coaxial digital
	audio cable is required. Do not connect them at the same time.
	• When TV has only one audio input jack, use a standard audio cable (white)
	to connect the audio output jack (white) on STB to the audio input jack on
	the TV. The standard audio cable (red) and the audio output jack (red) are
	not required.
Audio problems when	• When receiving analog signals, coaxial digital audio does not produce digital
	audio. Only when receiving digital signals, does coaxial digital audio
using coaxial digital	produce digital audio.
audio cable	• When pressing AUDIO, STEREO and MONAURAL will repeat in
	sequence. However, this will not affect the channels through the digital
	audio out jack.
	• Make sure that AUTOSCAN in SETUP WIZARD or SETUP menu has been
No reception of digital	completed. It will be required when you setup STB for the first time or when
	STB is moved to a location where other channels are broadcast.
signals	• The selected channel does not exist at that time. There are not always sub-
	channels being broadcast.
	• When AUTOSCAN is interrupted and not completed, some channels will
	not be received. Make sure to complete AUTOSCAN in SETUP menu.
The entered channel	• Many digital channels have alternate channel numbers. STB changes the
number changes	numbers automatically to the ones signifying the broadcasting stations.
automatically	These are the numbers used for analog broadcasts.
No reception of channels	• Some channels are not received with AUTOSCAN in SETUP menu.
	However, when you are sure they exist, find alternate channel numbers for
with weak signal	them (described above), then add the channel numbers with ADD in SETUP
(AUTOSCAN)	menu. You may get the information on the web site of the broadcasting
	stations.
When you forget the	• Unplug the AC power cord and wait for approx. 5 seconds, then enter the
password for V-CHIP	default number "0000."
Closed captioning
display (TEXT mode)	• Change the TV setting to the other mode except VIDEO mode.
does not go off even	• Change channels through the TV.
after changing channels
through STB.

87

EN

6 Appendix and Warranty

1A23