Panasonic AJ-D455P AC in socket Signal GND terminal, Fan motor, Time Code IN/OUT connectors

Page 12

Controls and their functions

<Connector area>

qAC IN socket

wSIGNAL GND terminal

This is connected to the signal ground terminal on the component connected to the unit in order to reduce the noise. It is not a safety ground.

eFan motor

This motor drives the fan to cool down the unit.

rTIME CODE IN/OUT connectors

These are the time code input and output connectors.

tDIGITAL AUDIO IN/OUT connectors

These are the input and output connectors for the digital audio signals complying with the AES/EBU standard.

yANALOG COMPONENT VIDEO IN connectors

These are the analog component video signal input connectors.

uANALOG COMPOSITE VIDEO IN connectors and 75Ω termination switch These are the analog composite video signal input connectors.

The two connectors are connected by a loop-through configuration. For termination, set the switch to ON.

iREF VIDEO IN connectors and 75Ω termination switch These are the reference video signal input connectors. For termination, set the switch to ON.

oREMOTE connector (RS-422A connector)

The unit’s operations can be controlled from an external component by connecting an external controller to the unit using this connector.

!0ANALOG AUDIO CH1/CH2 connectors

These are the analog audio CH1 and CH2 input connectors.

!1S1-VIDEO IN/OUT connectors

These are the S1-VIDEO signal input and output connectors.

!2ANALOG COMPONENT VIDEO OUT connectors

These are the analog component video signal output connectors.

!3ANALOG COMPOSITE VIDEO OUT connectors

These are the analog composite video signal output connector. Video signals with a superimposed display can be output from the VIDEO OUT 3 connector. Whether a display is to be superimposed onto the signals is selected using the SUPER ON/OFF switch.

!4RS-232C connector

The unit’s operations can be controlled by a personal computer or other component which is connected to the unit using this connector.

!5ENCODER REMOTE connector

An external encoder controller is connected here to adjust the video output signal settings externally.

12

Image 12

Contents Operating Instructions FCC Note Do not OpenContents General and Features FeaturesMenu-driven setup Multi-function input/output interfacesChannel high-sound-quality digital audio Automatic editing functions from the external controllerControls and their functions Front panelCounter Display Section Power switch Cassette insertion slot Eject buttonEDIT/EDIT REC/REC/REC INH lamps Remote lamp5RESET button @2Headphones jack4CTL/TC/UB/REMAIN button 6REW button@3Volume control @5SUPER ON/OFF switch@6MONITOR Select switch @7INT/EXT switch#3VIDEO Input switch #4AUDIO Input switch#5REMOTE/LOCAL switch #2DIAG buttonConnector area AC in socket Signal GND terminal Time Code IN/OUT connectorsDigital Audio IN/OUT connectors Analog Component Video in connectors6MONITOR OUT connector 7ANALOG Audio OUT connectorsTapes Type Description ConsumerCassette StandardSetup default settings Changing the settingsSETUP-MENU Init SET YESPLAY/NOSTOP Following message is displayedSetup menus Changing the fileSetting and releasing the lock mode Loading a user file Automatic loading of user file when the power is turned on Saving a user fileSetting Description System menuSystem DisplaySystem Setting Description Video output signal adjustmentsUser menu BasicBasic Setting Description Operation Operation Interface Edit Edit Setting Description JOG FWD JOG REVTape Protect Time Code Time Code SBC Sub Code Data areaVaux Video Auxiliary Data area Video Video Setting Description VIN SetupWide SelectAudio Audio Setting Description Menu Time code/user bit Time codeUser bit Setting the internal time code Setting the external time code TC switch → EXTRecording internal/external time codes Reproducing the time code/user bit Operation mode Superimpose screenCharacters displayed Display positionServo reference Rack mounting Video head cleaning Installing the mechanism dust protectorCondensation Error messages Diag menuDisplaying the Diag menu Displaying the Hours Meter information Item No DescriptionPriority Counter display Description Monitor display Auto OFF mode Connector signals Pin No. SignalSignal Pin No IEEE1394Signal RS-232C Remote 25-pin D-SUB straight cable supportedPin No Abbreviation Circuit Description Printed circuit board Printed Abbr Factory Circuit Full name FunctionBoard NameSpecifications Other input/output connectorPanasonic Broadcast & Television Systems Company