Panasonic AJ-D455P Video Setting Description, Wide, Select, Normal, VIN Setup

Setup menus

USER menu

<VIDEO> (continued)

	Item		Setting
						Description
No.	Superimposed	No.		Superimposed
	display			display
612	WIDE	0000			AUTO	This selects the operation to be conducted in response to the
	SELECT	0001			WIDE	WIDE information.
		0002		NORMAL		0: During recording, if the S1-VIDEO input signals contain
						WIDE information, the WIDE information is recorded on the
						tape.
						During playback, if WIDE information is on the tape, it is
						added to the S1-VIDEO output signals.
						1: During recording, the WIDE information is recorded on the
						tape regardless of whether the S1-VIDEO input signals
						contain the WIDE information.
						During playback, the WIDE information is added to the S1-
						VIDEO output signals regardless of whether the WIDE
						information is on the tape. →	Forced WIDE ON
						2: During recording, the WIDE information is not recorded on
						the tape regardless of whether the S1-VIDEO input signals
						contain the WIDE information.
						During playback, the WIDE information is not added to the
						S1-VIDEO output signals regardless of whether the WIDE
						information is on the tape. →	Forced WIDE OFF
						<Note>
						This item is effective during recording at the start of the
						recording and during playback at all times. Therefore, when its
						setting has been changed during recording, the MENU
						contents will be changed but no change will occur in the actual
						operation.
613	VIN SETUP	0000			THRU	This selects whether the composite signal is to be recorded
		0001			CUT	with setup or without setup.
						0: When recording signals with no setup.
						1: When recording signals with 7.5% setup.
						<Note>
						When recording composite signals, be sure to double-check
						whether the signals are to be recorded with or without setup.
620	Pb/Pr OUT	0000			MII	For selecting the analog component output level.
	LV	0001		B-CAM		0: MII level
						1: Betacam level

The underline on the setting item denotes the initial setting.

34