Panasonic AJ-D455P operating instructions Video

USER menu

<VIDEO>

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display			display
600	PB/PR	0000				MII	This selects the component input signal level.
	IN LV	0001				B-CAM	0: MII level.
							1: ß cam level.
601	INT SG	0000				OFF	For selecting whether an internal signal is to be generated.
		0001				BB	0: No signal is generated.
		0002				CB	1: A black burst signal is generated.
							2: A 100% color bar signal is generated.
							<Notes>
							• The INT SG message appears for 2 seconds when recording
							commences.
							• If the VIDEO INPUT switch #3is set to DVCPRO/DV, the
							audio signals will also serve automatically as the internal
							signals when a video signal has been selected as the
							internal signal by this menu item setting.
602	INPUT	0000				B/W	This selects color killer processing for the video input signals.
	C KILL	0001				AUTO	0: The signals are forcibly processed as B/W signals.
							1: The signals are automatically processed.
603	OUT	0000				N-VF	This selects whether to float the vertical sync position of the
	VSYNC	0001				VF	video output in order to align the video output phase with the
							input in the EE/record/edit modes.
							0: Signals are not floated.
							1: Signals are floated.
604	V-MUTE	0000			N-MUTE		This selects whether the video output signal is to be muted
	SEL	0001		LOW_RF			when the blank portion of the tape is detected during playback.
							0: No muting
							1: Muting (picture turns grey).
605	CC (F1)	0000				BLANK	This selects ON or OFF for the closed caption signal in the
	BLANK	0001				THRU	first field.
							0: Forced blanking performed.
							1: Blanking not performed.
606	CC (F2)	0000				BLANK	This selects ON or OFF for the closed caption signal in the
	BLANK	0001				THRU	second field.
							0: Forced blanking performed.
							1: Blanking not performed.
608	FREEZE	0000				FIELD	For selecting how the still picture is to be output.
	SEL	0001				FRAME	0: Field output
							1: Frame output
							<Note>
							When frame output is selected, the frame slow mode will be
							established during slow motion as well.
611	EDH	0000				OFF	This selects whether to superimpose EDH onto the serial
		0001				ON	output signals.
							0: EDH is not superimposed.
							1: EDH is superimposed.
							<Notes>
							• This display will not appear unless the AJ-YA455P serial
							interface board (optional accessory) has been installed.
							• Even when 1 (ON) has been selected, EDH is not super-
							imposed at the SERIAL OUT 3 connector if the SUPER ON/
							OFF switch is at the ON position.

The underline on the setting item denotes the initial setting.

33