Panasonic AJ-D455P operating instructions Operation

USER menu

<OPERATION> (continued)

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display			display
113	MEMORY	0000			OFF	This selects whether the VTR is to stop automatically when
	STOP	0001			ON	the counter value reaches “0” during a fast forwarding or
						rewinding operation in the CTL mode.
						0: The VTR does not stop.
						1: The VTR stops automatically.
						<Notes>
						1.	The stop mode concerned is either the stop or the still-
							picture mode depending on the setup menu No. 313
							(AFTER CUE-UP) setting.
						2.	When both the AUTO REW function and MEMORY function
							have been selected at the same time, the AUTO REW
							function takes precedence.
114	REC	0000			OFF	This selects whether to allow (enable) or prohibit (disable) the
	INHIBIT	0001			ON	recording of signals on the cassette tape.
						0: Signals can be recorded on the cassette tape when the
							cassette’s accidental erasure prevention mechanism is set
							to the recording enable position.
						1: Recording on the cassette tape is prohibited. In this case,
							the REC INH lamp on the front panel lights.
120	REC INH	0000			LIGHT	For selecting whether the REC INHIBIT lamp is to flash or light
	LAMP	0001		FLASH		when the cassette has been set to the accidental erasure
						prevention status.
						0: The lamp lights.
						1: The lamp flashes.
						<Note>
						When ON has been selected as the setup menu item No. 114
						(REC INHIBIT) setting, the REC INHIBIT lamp will light all the
						time regardless of what has been selected as this item’s
						setting.
121	EJECT SW	0000			REC	For selecting whether to enable or disable the operation of the
	INH	0001			OFF	front panel’s EJECT button.
						0: The button’s operation is disabled in the recording mode.
						1: The button’s operation is enabled in all modes.

The underline on the setting item denotes the initial setting.

25