Panasonic AJ-D455P System Setting Description, Video output signal adjustments

SYSTEM menu

<SYSTEM> (continued)

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display			display
18	CHROMA	0000			–127		For setting the chroma level.
		.		.
	LEVEL	.		.			The maximum amount by which the level can be varied is from
		.		.
		0127				0	–3 to +3 dB.
		.			.
		.		.
		.		.
		0255		128
21	SYS H	0000			–3		For adjusting the system phase offset: 4.48 ∝ s steps
	OFFSET	0001			–2		0: –13.4 ∝ s
		0002			–1		1: –8.96 ∝ s
							2: –4.48 ∝ s
		0003				0
							3: 0
		0004				4
							4: +4.48 ∝ s
		0005				5
							5: +8.96 ∝ s
		0006				6
							6: +13.4 ∝ s
							<Notes>
							• The setting remains unchanged even when the factory
							setting operation is performed.
							• When this menu item is used together with SYSTEM menu
							item No. 02 (SYS H) setting, the adjustment is limited to a
							range from –15 to +15 ∝ s.
22	SYS SC/H	0000		REMOTE			For setting whether the system phase is to be adjusted by the
		0001			LOCAL		unit or from the external encoder remote connector.
							0: The system phase is adjusted from the external encoder
							remote connector.
							1: The system phase is adjusted by the unit.
							<Notes>
							• This setting remains unaffected when OFF is selected as the
							SYSTEM menu item No. 3 (ENCODER SEL) setting.
							• The range for the system phase adjustment using the
							encoder remote connector is –3 to +3 ∝ s. When this menu
							item is used together with SYSTEM menu item No. 021
							(SYS H OFFSET) setting, adjustment can be made from –15
							to +15 ∝ s.
30	MENU	0000			OFF		This selects whether the system file lock mode is to be
	LOCK	0001			ON		engaged or released.
							0: The lock is released (file data can be changed).
							1: The lock is engaged (file data cannot be changed).

The underline on the setting item denotes the initial setting.

Video output signal adjustments

The SYSTEM menu item No. 03 (ENCODER SEL) and No. 22 (SYS SC/H) settings are used to make the video output signal adjustments. The table below shows the control matrix for these adjustments.

Setting			Adjustment item
		SYSTEM menu item		VIDEO LEVEL
SYSTEM menu item	SYSTEM menu item			CHROMA LEVEL
		00: SYS SC COAR.
03: ENCODER SEL	22: SYS SC/H			SET UP
		01: SYS SC FINE
				HUE
OFF	LOCAL	Unit		Unit (SYSTEM menu)
	REMOTE
ON	LOCAL	Unit		External encoder remote
	REMOTE	External encoder remote

21