Panasonic AJ-D455P operating instructions Auto OFF mode

Warning

Priority	Error No.	TV monitor display*	Description	VTR operation
High	E-10*	FAN STOP	Error No. lights when a fan motor stops operating.	Continued
	(Err-10)
	E-09*	NO RF	This appears when a blank exceeding 1 second is	Continued
			detected on the tape during playback.
	(Err-09)
	E-00*	SERVO NOT LOCKED	Error No. lights when servo disturbances continue for	Continued
			3 or more seconds during playback, recording or
	(Err-00)
			editing.
	E-01*	LOW RF	Error No. lights when envelope levels approx. 1/3 that
			of normal levels are detected for more than 1 sec.	Continued
	(Err-01)
			during playback, recording or editing.
	E-02*	HIGH ERROR RATE	Error No. lights when the error rate increases and
			correction/interpolation is performed on either the	Continued
Low	(Err-02)
			video or audio playback signal.

* Displays when warning information is checked by pressing the DIAG button.

AUTO OFF mode

The following error number flashes on the counter display section.

Error No.	TV monitor display	Descriptions	VTR operation
			(VTR measures)
		When condensation is detected, the error no. display
		flashes, and the unit goes into EJECT mode. The drum
		rotates after the cassette tape is ejected to remove
		condensation.
E-20		When the condensation has been removed, the error no.
	DEW	display disappears and the VTR may be used.	EJECT
		<Notes>
		1) The drum rotates as soon as condensation is detected
		when the unit is in EJECT mode.
		2) When condensation is detected while a cassette tape is
		inserted, drum rotation stops, the cassette tape is ejected
		and the drum rotation begins again.
Any other		If any other number appears frequently, ask your dealer to
number		inspect the unit.

47