Panasonic AJ-D455P operating instructions Audio Setting Description

Setup menus

USER menu

<AUDIO> (continued)

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display			display
720	EMBEDDED	0000				OFF	This selects whether to superimpose the audio data onto the
	AUD	0001				ON	serial output.
							0: Data is not superimposed.
							1: Data is superimposed.
							<Note>
							This display will not appear unless the AJ-YA455P serial inter-
							face board (optional accessory) has been installed.
721	LINE CH	0000				PCM	This selects the audio output for CH1 and CH2.
	SEL	0001			AUTO		0: PCM AUDIO is output.
							1: PCM AUDIO is output in the –0.43⋅to 1⋅ speed range; in
							all other cases, CUE is automatically output.
							<Note>
							The PCM AUDIO output CH1 and CH2 signals are output
							separately regardless of the position selected for the AUDIO
							MONITOR SELECT switch.
722	INT SG	0000				OFF	This selects whether the internal signal is to be used for the
		0001				ON	audio input signal.
							0: The internal signal is not selected.
							1: The internal signal is selected.
							<Notes>
							• The internal signal has a frequency of 997 Hz.
							• This setting is invalid if the VIDEO INPUT switch #3has
							been set to DVCPRO/DV.
723	DV PB ATT	0000				OFF	This selects the audio output level for DV format playback.
		0001				ON	0: The audio output level is not attenuated.
							1: The audio output level is attenuated (reduced).
729	REC PT	0000				OFF	For selecting whether to mute the sound at the joins between
	MUTE	0001				ON	recordings during DV or DVCAM cassette playback.
							0: The sound is not muted.
							1: The sound is muted.
731	REF LEVEL	0000			FS-20		For setting the audio reference level.
		0001			FS-18		0: Full scale, –20 dB
		0002			FS-12		1: Full scale, –18 dB
							2: Full scale, –12 dB

The underline on the setting item denotes the initial setting.

36