Panasonic AJ-D455P operating instructions 6MONITOR OUT connector, 7ANALOG Audio OUT connectors

Page 13

!6MONITOR OUT connector

The PCM audio CH1 and/or CH2 signals (or playback signals from the CUE track) are output to this connector. PCM audio signals are output in the PLAY mode and in the –0.43(–0.5) to +1speed range; at all other times, the CUE signals are automatically output.

<Notes>

The speed in parentheses given for the speed range above applies when a DV or DVCAM cassette is used.

Either CH1, CH2 or mixed (CH1+CH2) PCM audio signals are output depending on the position selected by the AUDIO MONITOR SELECT switch.

!7ANALOG AUDIO OUT connectors

These are the analog audio CH1 and CH2 output connectors.

!8SERIAL DIGITAL COMPONENT AUDIO VIDEO IN/OUT connectors (The AJ-YA455P, an optional accessory, is required.)

These are the input and output connectors for the digital component audio and video signals complying with the SMPTE259M-C or 272M-A standard.

!9DIGITAL VIDEO INTERFACE (IEEE1394) IN/OUT connector (The AJ-YAD455P, an optional accessory, is required.) This is the IEEE1394 interface input/output connector.

13

Image 13
Contents Operating Instructions Do not Open FCC NoteContents Features General and FeaturesMulti-function input/output interfaces Menu-driven setupChannel high-sound-quality digital audio Automatic editing functions from the external controllerFront panel Controls and their functionsCounter Display Section Cassette insertion slot Eject button Power switchEDIT/EDIT REC/REC/REC INH lamps Remote lamp@2Headphones jack 5RESET button4CTL/TC/UB/REMAIN button 6REW button@5SUPER ON/OFF switch @3Volume control@6MONITOR Select switch @7INT/EXT switch#4AUDIO Input switch #3VIDEO Input switch#5REMOTE/LOCAL switch #2DIAG buttonConnector area Time Code IN/OUT connectors AC in socket Signal GND terminalDigital Audio IN/OUT connectors Analog Component Video in connectors7ANALOG Audio OUT connectors 6MONITOR OUT connectorType Description Consumer TapesCassette StandardChanging the settings Setup default settingsSETUP-MENU Init SET YESPLAY/NOSTOP Following message is displayedChanging the file Setup menusSetting and releasing the lock mode Loading a user file Saving a user file Automatic loading of user file when the power is turned onSystem menu Setting DescriptionSystem DisplayVideo output signal adjustments System Setting DescriptionBasic User menuBasic Setting Description Operation Operation Interface Edit Edit Setting Description JOG REV JOG FWDTape Protect Time Code SBC Sub Code Data area Time CodeVaux Video Auxiliary Data area Video VIN Setup Video Setting DescriptionWide SelectAudio Audio Setting Description Menu Time code Time code/user bitUser bit Setting the external time code TC switch → EXT Setting the internal time codeRecording internal/external time codes Reproducing the time code/user bit Superimpose screen Operation modeCharacters displayed Display positionServo reference Rack mounting Installing the mechanism dust protector Video head cleaningCondensation Diag menu Error messagesDisplaying the Diag menu Item No Description Displaying the Hours Meter informationPriority Counter display Description Monitor display Auto OFF mode Pin No. Signal Connector signalsSignal Pin No IEEE1394RS-232C Remote 25-pin D-SUB straight cable supported SignalPin No Abbreviation Circuit Description Printed Abbr Factory Circuit Full name Function Printed circuit boardBoard NameOther input/output connector SpecificationsPanasonic Broadcast & Television Systems Company