Panasonic AJ-D455P operating instructions Time Code

USER menu

<TIME CODE>

	Item		Setting
						Description
No.	Superimposed	No.		Superimposed
	display			display
500	VITC	0000			10L	This sets the position where the VITC signal is to be inserted.
		.		.
	POS-1	.		.		(The same line as for VITC POS-2 in 501 cannot be
		.		.
		0006			16L	selected.)
		.			.
		.		.
		.		.
		0010			20L
501	VITC	0000			10L	This sets the position where the VITC signal is to be inserted.
		.		.
	POS-2	.		.		(The same line as for VITC POS-1 in 500 cannot be
		.		.
		0008			18L	selected.)
		.			.
		.		.
		.		.
		0010			20L
502	VITC	0000			BLANK	This selects whether to output the VITC data to the positions
	BLANK	0001			THRU	selected by VITC POS-1 in 500 and VITC POS-2 in 501.
						0: Data is not output.
						1: Data is output.
503	TCG	0000			TC&UB	This selects the signal to be regenerated when the time code
	REGEN	0001			TC	generator (TCG) in the REGEN mode.
		0002			UB	0: Both the time code and user bit are regenerated.
						1: Only the time code is regenerated.
						2: Only the user bit is regenerated.
504	REGEN	0000			OFF	This selects whether values used in the internal time code
	MODE	0001			ON	generator are preset from the front panel or remote controller
						or synchronized with time code values read from the tape.
						0: Values are preset from the front panel or remote controller.
						(PRESET)
						1: Values are synchronized with time code values read from
						the tape. (REGEN)
						<Note>
						When “1” is selected, values selected at set up menu No. 503
						(TCG REGEN) are regenerated.
505	EXT TC	0000			LTC	This selects the time code to be used when an external time
	SEL	0001			VITC	code is to be used.
						0: The LTC of the TIME CODE IN connector is used.
						1: The video signal VITC is used.
506	BINARY	0000			000	This sets the usage status of the user bit of the time code
	GP	0001		001		generated by the TCG.
		0002		010		0: NOT SPECIFIED (character set not specified)
		0003		011		1: ISO CHARACTER (8 bits character set based on ISO646,
						ISO2022)
		0004		100
						2: UNASSIGNED 1 (undefined)
		0005		101
						3: UNASSIGNED 2 (undefined)
		0006		110
						4: UNASSIGNED 3 (undefined)
		0007		111
						5: PAGE/LINE
						6: UNASSIGNED 4 (undefined)
						7: UNASSIGNED 5 (undefined)
507	PHASE	0000			OFF	This selects whether to control the phase correction of the
	CORR	0001			ON	LTC generated by the TCG.
						0: Phase correction control is not performed.
						1: Phase correction control is performed.
508	TCG CF	0000			OFF	This selects whether the CF flag of the TCG is to ON.
	FLAG	0001			ON	0: CF flag is OFF.
						1: CF flag is ON.

The underline on the setting item denotes the initial setting.

31