Panasonic VQT0C55 manual ON-SCREEN Display Status display, Time code, 00 00, VTR operation mode

ON-SCREEN DISPLAY – Status display – (continued)

3 2 K C H – 1 / 2 0 m i n

1 0 / 1 0 / 0 2	S T A N D B Y - O F F
1 2 : 0 0 : 0 0	T C R 0 2 : 0 0 : 0 0 : 0 0

3

5

4

No.	Item				Content
3	Time code	• It displays the time codes (hour, minute, second and frame).
		During playback, the time codes recorded on the tape are
		displayed.
		TCR	: time code reader data
		TCG	: time code generator data
		DTCG : time code data input from a DV IN terminal
		• The symbols for the second and frame differ according to the
		framing modes. (NTSC only)
		00 : 00 : 00			00
				:
					¥ dot (.) is used for a dropped frame.
						colon (:) is used for a non-dropped
						frame.
		• The time code display position can be set via the COUNTER
		POSI. item of the DISPLAY menu.
		• The TIME CODE item can be set to turn on/off the time code
		display.
		• The user’s bit is not displayed.
4	VTR operation mode	It displays the VTR operation modes, including:
		PLAY, EJECT, FF, REW, STOP, STANDBY-OFF, STILL, REC,
		REC PAUSE, A. DUB, A. DUB PAUSE, SHTL (shuttle search),
		JOG (F.ADV, R.ADV), BLANK SRH (blank search), NO CAS-
		SETTE (cassette not loaded), POWER OFF.
		When SHTL or JOG is displayed, the speed will also be dis-
		played at the same time.
		• The VTR MODE item of the DISPLAY menu can be set to
		turn on/off the VTR operation mode display.
5	Remaining tape	It displays the remaining tape duration (minutes).
	Memo	• The TAPE REMAIN item in the DISPLAY menu can be set to
		turn on/off the remaining tape duration display.
	If the display position of the	• Please use the remaining tape time as a gauge.
	time code is set to the upper
	right, this item will be dis-
	played on the lower right.

E-20