Panasonic VQT0C55 manual AUDIO/VIDEO menu

AUDIO/VIDEO menu

	Items	Setting					Contents
AUDIO MODE		 48K	Select the audio sampling frequency for recording:
		32K	48K : Records at 48kHz. It records in the 2-channel stereo mode.
						No audio dubbing.
			32K : Records at 32kHz. It records in the 4-channel mode. To
						perform audio dubbing on CH3 and CH4 later, use this set-
						ting.
					Memo
			This setting is not required for DV signal input.
A.OUT AT		 OFF	Use this menu item to enable/disable audio output from the AU-
SEARCH		ON	DIO OUT terminal during a search:
			OFF			: No output.
			ON			: Output.
AUDIO OUT SEL		 CH-1/2	Use this menu item to select the audio channel output from the
		MIX	AUDIO OUT terminal when playing back tapes recorded in the
		CH-3/4	32K mode:
	Memo
			CH-1/2 : Outputs CH1 and CH2 audio.
	When it is set to the MIX		MIX				: Outputs mixed audio of CH1 and CH3 and mixed au-
	mode, noise may be pro-						dio of CH2 and CH4.
	duced. If this occurs,		CH-3/4				: Outputs CH3 and CH4 audio.
					Memo
	please set it to CH-1/2 or
	CH-3/4.		This setting can also be selected from the AUDIO OUT SEL. but-
			ton on the wireless remote controller.
AUDIO OUT		ATT	Use this menu item to select the standard level for audio playback
LEV		 NORM	output:
			ATT			: Attenuates the output level to about 8dB. Use this setting
						when playing tapes recorded on a VTR of which the stand-
						ard level for PCM audio is full scale -12dB. The playback
						level is decreased by 8dB.
			NORM : Usually, this is selected.
					Memo
			This setting can also be selected with the AUDIO OUT LEV. button
			on the wireless remote controller.
SET UP		 OFF	During recording
(NTSC)		ON	OFF			: Select this when analogue signals are input without setup.
			ON			: Select this when analogue signals are input with setup.
			During playback
			OFF			: Setup is not applied to analogue video signals (composite, S-VIDEO)
			ON			: Setup is applied to analogue video signals (composite, S-VIDEO)
					Memo

•If dubbing is repeatedly done with the settings of the playback or recording video signals differing from the setting here, the hue and brightness of the video may turn out abnormal.

•A high level of knowledge pertaining to video signals is neces- sary to set this menu. Generally, for DV camcorders, SETUP is recorded on the tape as part of the video signals. Accordingly, SETUP is normally set to “OFF”.

To use SETUP correctly, switch the setting according to the video signals being used.

PAGE BACK

Return to the top MENU.

E-57