Menu Screen Contents of the menus | Panasonic VQT0C55 instruction

MENU SCREEN – Contents of the menus – (continued)

REMOTE menu

Items	Setting					Contents

LOCAL	NO KEY	Use this to select the buttons on the main unit to be rendered operable
FUNCTION	EJECT	when remote controlling the unit via the 9 PIN REMOTE terminal:
	STP + EJT	NO KEY				: No button enabled.
	ALL KEYS	EJECT				: Only the EJECT button enabled.
		STP + EJT				: Only the STOP button and the EJECT button are ena-
						bled.
		ALL KEYS				: All operation buttons are enabled.

PREROLL	3SEC	When remote controlling the unit via the 9 PIN REMOTE terminal, use
	5SEC	this item to set the PREROLL time of the unit. Configurations done via
	7SEC	the editing remote controller prevail over other settings:
	10SE	3SEC		: 3 seconds
		5SEC		: 5 seconds
		7SEC		: 7 seconds
		10SEC		: 10 seconds
			Memo
			Memo		editing precision, please set it to at least 7 seconds.

		To enhance

REM FF/REW	FF/REW	Use this menu item to set the action to be performed when an FF/REW
MODE	SEARCH	command is received via the 9 PIN REMOTE terminal or DV terminal:
		FF/REW				: Sets the unit to execute FF/REW when a command is
						received. This is the usual setting.
		SEARCH				: Sets the unit to go into the SEARCH state when a com-
						mand is received. Use this setting if the locate(cue up)
						function does not work well.

REM STOP SEL	EE	Use this menu item to set the action to be performed when a STANDBY
	PB	ON command is received via the 9 PIN REMOTE terminal or DV termi-
		nal:
		EE: Sets the unit to the EE mode. (The unit will go into the STOP mode.)
		PB: Sets the unit to the PLAY mode. (The unit will go into the STILL
		mode.)

PLAY DELAY	0F	Use this menu item to adjust the edit timing. When the remote control-
		ler is used, there will be a slight delay time before edit starts. To rectify
	15F	the time discrepancy, adjust the timing for starting playback:
		0F				: No compensation.
		1F to 15F : Delay by the number of frames set by the user. When this
						unit is connected to an editing remote controller with no
						BUMP (synchronization) function, use this setting to ad-
						just the editing precision.

SYNCHRONI-	OFF	Use this setting to turn on/off the BUMP function when the unit is con-
ZATION	ON	nected to an editing remote controller:
		OFF : No synchronization.
		ON : Execute synchronization. The editing precision is enhanced .
			Please set the pre-roll time to at least 7 seconds.

CONTROLLER	TYPE1	When remote control is executed via the RS-422A interface, use this
SEL	TYPE2	menu item to set the type of controller connected:
	TYPE3	TYPE1		: Remote controller not of PANASONIC
	TYPE4	TYPE2		: Remote controller not of PANASONIC
	TYPE5	TYPE3		: AG-A850, AJ-A95
	TYPE6	TYPE4		: Remote controller not of PANASONIC
	TYPE7	TYPE5 - TYPE7 : (not in use)

E-56