Panasonic VQT0C55 manual Playback Selecting playback audio output, Mix

PLAYBACK – Selecting playback audio output –

The output mode for audio playback can be selected with the remote controller.

DISPLAY

VCR

POWER

⬛To turn the audio muting function ON/ OFF or to mute the EE audio, press the AUDIO MUTING button.

BARS	STILL	BLANK	/I
	MODE
			AUDIO	AUDIO MUTING
MENU	SEARCH+		MUTING
				button
			OUT SEL.	OUT SEL.
	SET
				button
	SEARCH–		OUT LEV.
				OUT LEV.
A.DUB	PAUSE		REC	button
F.REV	PLAY		F.ADV
REW			FF
	STOP
INDEX			INDEX

–+

VEQ3533

To resume the audio output, press the button again.

⬛Selecting the audio output channel for playback of tapes recorded in the 32kHz mode.

Each time the OUT SEL. button is pressed, the channel changes in the following sequence:

CH1/CH2 CH3/CH4 MIX

•CH3/CH4 : CH3 audio is output via the CH1/3 AUDIO OUT terminal whereas CH4 audio is output via the CH2/4 AUDIO OUT terminal.

• MIX	: Sounds mixed from CH1 and CH3
	are output via the CH1/3 AUDIO
	OUT terminal whereas Sounds
	mixed from CH2 and CH4 are out-
	put via the CH2/4 AUDIO OUT ter-
	minal.

Memo

•The output channel for playback audio of tapes recorded in the 32kHz mode can also be set via the AUDIO OUT SEL item of the AUDIO/VIDEO menu of the main unit.

•The audio output level can be set via the AUDIO OUT LEVEL item of the AUDIO/ VIDEO menu.

(☞ Page 57 “AUDIO/VIDEO menu”)

Note

Depending on the sound source, noise may occur in the MIX mode. In this case, please use CH1/CH2 or CH3/CH4.

⬛Select the output level for audio play- back

Each time the OUT LEV. button is pressed, the standard level for the output audio level changes. (NORMAL or ATT)

•When the output level is set at ATT, the audio output level is decreased by 8dB.

•To play back tapes recorded on this unit, set the output level to NORMAL.

E-47