Panasonic VQT0C55 Locate function, Index search, Blank search, Stop mode, press the Blank button

PLAYBACK – Locate function –

Index search

This function locates and advances/rewinds to the position where the index signal is recorded. Use the remote controller.

A.DUB PAUSE REC

F.REVF.ADV

PLAY

⬛To locate an index in the forward direction vis-a-vis the current tape position:

REW	FF
	STOP
INDEX	INDEX

–+

•Press the INDEX + button.

The index position to be located can be specified by the number of times this button is pressed. (Max: 99)

VEQ3533

INDEX –	INDEX +
button	button

Monitor screen

INDEX+1

During index search, this message is displayed on the monitor

(the number represents the position of the index).

⬛To locate an index in the reverse direction vis-a-vis the current tape position:

•Press the INDEX - button.

The index position to be located can be specified by the number of times this button is pressed. (Max: 99)

⬛When the INDEX + or INDEX - button is pressed, the unit will fast-forward or rewind to the specified indexed po- sition and start playing.

Memo

•If the interval between index signals is less than 1 minute, the function may not work well.

•The specifications for index signal recording varies with the device used.

Blank search

This function locates the unrecorded parts of the tape. Use the remote controller.

BLANK button

	VCR		POWER
DISPLAY
BARS	STILL	BLANK	/I
	MODE
			AUDIO
MENU	SEARCH+		MUTING

OUT SEL.

Monitor screen

⬛In the STOP mode, press the BLANK button.

¥• If the current position is at a recorded part of the tape, the unit fast-forwards until an unrecorded part is reached and goes into the STOP mode.

•If the current position of the tape is unrecorded, the unit will first advance the tape in the forward direction for confirmation and there after rewind and go into the STILL mode at the last recorded posi tion.

•During a blank search, “BLANK SEARCH” is displayed on the moni tor.

BLANK SEARCH

E-46