Panasonic VQT0C55 manual Condensation, Over 10 years, Prevention of condensation

Page 9

For recording and storing videotapes in the best condition

Observe the following instructions for the best recording and storage of videotapes.

Take care of the conditions of handling videotapes.

It is recommended that you record and store videotapes in the environment below.

 

 

 

Storage

 

Recording

Short period

 

Long period

 

 

(Up to 10 years)

 

(Over 10 years)

 

 

 

 

 

Temperature

17°C to 25°C

15°C to 23°C

 

15°C to 19°C

 

 

 

 

 

Humidity

30% to 70%

40% to 55%

 

25% to 35%

 

 

 

 

 

Hourly temperature change

Less than 10°C

 

 

 

 

 

 

Hourly humidity change

Less than 10%

 

 

 

 

 

 

Do not leave the videotapes neglected for a long period.

If videotapes are left wound for a long period of time, it may result in distortion of the tape. Also it may cause tape-to-tape adhesion (known as blocking). It is recommended that videotapes be unspooled and rewound once a year for refreshing.

When tapes are not in use, store them in cases and on end.

Storage cases protect videotapes from humidity, dust and ultraviolet. Keep tapes in cases and do not store them lying flat. When housed in a horizontal position, pressure from other tapes can cause distor- tions and deformations of the tape edges.

Condensation

When this unit is moved from a cold to a warm place abruptly, the vapor in the warm air will come into contact with the head drum or the tape guides. When chilled, the vapor turns into drop- lets of water. This state is known as condensa- tion. When condensation occurs, the videotape will adhere to the head drum or the tape guides and will be damaged.

Condensation occurs on this unit in the following circumstances:

It is moved abruptly from a cold place to a warm place.

It is used in a room immediately after the heater has been turned on, or when cold breeze from an air-conditioner blows onto it.

It is used at a place of high humidity.

Head drum

Videotape

When a cassette tape is loaded, please do not transport e.g., from an external cold place to a warm room thereby subjecting the unit to dras- tic temperature changes.

After moving the unit, please do not use it until the innards are stabilized.

When condensation occurs, the monitor displays the following warning:

CONDENSATION ON DRUM

To remedy, leave the unit with the power ON and wait until the WARNING indicator disappears.

Prevention of condensation

When transporting the AG-DV2500E from a cold to a warmer place abruptly, first take out the cas- sette. Then place the AG-DV2500E in a plastic bag and seal it before transporting the unit.

Leave the AG-DV2500E in the sealed plastic bag until the unit has the same temperature as the surroundings. This will prevent condensation.

E-9

Image 9
Contents VQT0C55 Digital Video Cassette RecorderPort Cable Length SupplementFor Continental EUROPE, ETC For Your Safety Please Read the Following Text CarefullyDV format Wireless remote controlHigh picture and sound quality by digital tech- nology Compatible mechanisms for standard/mini DV cassettesTable of Contents Introduction Precautions Place of storage and use  Handling the unit Regular inspection maintenance Daily maintenance and regular inspection Head cleaning Maintenance consultationPrecautions on the use of tape Precautions on the use of cleaning tapeCassette tape MemoCondensation Over 10 yearsPrevention of condensation Cassette slot Power Power button/LEDDUB Audio dubbing button/LED LineMIC Microphone input terminal Remote Remote select switchEject Eject button PINPlay Play button/LED REC Record button/LED FF Fast forward button/LEDPause Pause button/LED @ Stop Stop button/LEDSensor for wireless remote controller $ Indicator Audio indicatorNTSC/PAL NTSC/PAL signal se- lection switch DC power input terminal 2PPIN Remote 9-pin remote ter- minal D-SUB It cannot be used for NTSC/PAL conversionTerminal 4P Audio in Audio input terminalNal Phono Video OUT S-VIDEO output termi Nal 4PStill Mode button Power button fButtons related to menu setting and variable speed playback Display buttonPause button DUB button# F. ADV button $ F. REV buttonON-SCREEN Display Regarding on-screen display On-screen display Contents MethodON-SCREEN Display ContentStatus display MemoON-SCREEN Display Status display VTR operation modeTime code 00 00Event display Display at position a Operation in progressDisplay at position B Display for about 3 seconds Alarm display REC Inhibit Copy InhibitDUB Inhibit REC TABPrecautions on the use of battery Preparation Provided wireless remote controllerGuide on battery replacement When replacing the batteriesOperable scope of the wireless remote controller Using the wireless remote controllerSensor for the wireless remote controller Maximum distance to the sensor of the unit 6m AngleConnecting to the AC adapter PowerPreparation ScrewTurning off the power Switching on the powerIndicator Preparation Selecting the NTSC/PAL signal systemPreparation Loading/ejecting cassettes Loading the cassetteEjecting the cassette Setting the date and time Preparation Setting/displaying date and timeDisplaying the Clock Adjust menu Displaying the top MenuTo return to the usual menu, do the following Set the date or time on the Clock Adjust menuSelecting date/time display Enabling on-screen displayTime STYLE...Select the style of time display Recording Connection and settingConnection RecorderSetting Preset time codes Setting time codesTime code is not preset Time code recordingRecording time codes of a DV input terminal Recording method Recording index signalsSeries recording function Backup unit the main unitDV Camcorder Set the DV TC DUP. item of the Time Code menu to OFFStop Audio dubbing¥ The unit goes into the audio dubbing pause mode ¥ The unit goes into the Still modeHold down the A.DUB button and press the Pause button Press the Pause buttonUsing this unit as a standalone device Connection/settingConnecting this unit to a video device with a DV terminal PlaybackRemote switch on the front panel System menuAUDIO/VIDEO menu Fast forward/rewind Basic playback methodSpecial playback function Still Mode item of the System menuFrame advance reverse playback Frame reverse in the reverse directionSet the unit to the search mode Variable speed playbackChanging the direction of playback Index search Locate functionBlank search Stop mode, press the Blank buttonPlayback Selecting playback audio output Select the output level for audio play- backMIX Edit Using the unit in an editing systemLinear editing system  Applicable modelRemote menu Play DelayREM Stop SEL SynchronizationConnecting using DV 1394 terminal Using the unit in a non-linear system Set the Input switch of the front panel to DV Remote switch on the front panel can be set at any positionStructure of the menu Menu Screen Set the unit to the Stop mode Setting the menuDisplay the menu for setting Display the top MenuTo return to the usual screen, do either of the following Set the items on the menuPress the  button Press the REW button Select page Back MenuContents of the menus  System menu System menuMenu Screen Contents of the menus AUDIO/VIDEO menu Time Code menu  Display menu Display menuDate Style Audio Info  OFFTime Style 12HOUR 24HOUROthers Placing the unit in an upright position  Alarm display Displayed regardless of the Display mode OthersDisplay Status Action Loading Failure  Warning display Displayed regardless of the Display modeTroubleshooting  To set the unit to the Stop mode Checking the hour meterTo return to the usual screen Specification 260 174  Diagram of external dimension Unit mmPanasonic Broadcast Europe GmbH Panasonic Broadcast Europe