Panasonic AJ-D440, AJ-D450 manual 4S1-VIDEO OUT connector, 5ANALOG Component Video OUT connector

Page 13

<Connector area>

!4S1-VIDEO OUT connector

This is the S-VIDEO output connector.

!5ANALOG COMPONENT VIDEO OUT connector

The analog component video signal is output from this connector.

!6ANALOG COMPOSITE VIDEO OUT connectors

The analog composite video signals are output from these connectors.

The video signal with signals superimposed on it can be output from the VIDEO OUT3

connector.

The superimpose function can be set ON or OFF on the setup menu No. 006 (SUPER).

!7REMOTE connector

The unit can be controlled from an external source by connecting an external controller.

!8ENCODER REMOTE connector

The external encoder/controller is hooked up to this connector when the video output

signal and other settings are to be adjusted from an external source.

!9RS-232C connector

@0DIGITAL AUDIO IN/OUT connector (optional AJ-YA655P required.)

This I/O connector is for digital audio signals which comply with the AES/EBU standard.

<Note>

Does not input with AJ-D440.

@1SERIAL DIGITAL COMPONENT AUDIO/VIDEO IN/OUT connector (optional AJ-YA750P interface board required)

This I/O connector is for digital component audio and video signals which comply with the SMPTE 259M-C/272M standard.

The optional AJ-YA655P is required for digital audio signal output on the AJ-YA750P board.

<Note>

Does not input with AJ-D440.

– 13 –

Image 13

Contents Page FCC Note Contents General and Features Analog input/output Menu-driven setupDigital audio input/output Serial digital input/outputCounter Display Section Controls and their functionsCassette insertion slot Power switchEject button EDIT/EDIT REC/REC/REC INH lamps AJ-D450 onlyPage @2Volume control @1Headphones jack@4CTL/TC/UB switch @5MONITOR Select switch#3AUDIO Input switch AJ-D450 only #2VIDEO Input switch AJ-D450 only#4REMOTE/LOCAL switch #0SET buttonConnector area Signal GND terminal AC in connectorAnalog Audio in connectors Time Code in connector5ANALOG Component Video OUT connector 4S1-VIDEO OUT connector6ANALOG Composite Video OUT connectors 7REMOTE connectorType Description TapesConsumer CassetteWhen recording/playback using 1 unit When recording, playback & editing with 2 units deck to deck When using an editing controller Connect the equipment as shown in the figure below Internal encoder adjustmentsVideo OUT REF BB Recorder OUTAdjust the connected P2 VTR in the same way Beta Printed circuit boardSwitching on the power/inserting the cassette Still Timer Setting Stop mode2Adjusting the audio level 1Selecting video/audio input signalsRecording AJ-D450 only Playback Setup default settings Changing the file Setup setting menusSetup menus USER1 Page Page Basic Setting Description Setup menus Operation Setting DescriptionID SEL 9P SELOther DvcproAuto STDNON-STD ServoSetup menus Edit Tape ProtectSetup menus Time Code Video Setting Description Audio Audio Setting Description Step CUE SlowLinear LoadTime code Time code/user bitSetting the external time code TC switch → EXT Setting the internal time codeRecording internal/external time codes Reproducing the time code/user bit Superimpose screen Servo reference Servo reference setting tables Audio V Fade Function AJ-D450 only Rack mounting Condensation Video head cleaningDiag menu Error messagesError messages Page Error messages External interface specifications Hardware specificationsRS-232C interface IntroductionRS-232C interface Page RS-232C interface Page Commands relating to inquiries CLS Microsoft QuickBASIC sample programConnector signals RS-232C Remote 25-pin D-SUB straight cable supported SignalGeneral SpecificationsPage Panasonic Canada INC