Panasonic AJ-D440, AJ-D450 manual Time Code

USER menu

<TIME CODE> (continued)

	Item		Setting
						Description
No.	Superimposed	No.		Superimposed
	display				display
507	PHASE	0000			OFF	This selects whether to control the phase correction of the
	CORR	0001			ON	LTC generated by the TCG.
						0: Phase correction control is not performed.
						1: Phase correction control is performed.
508*	TCG CF	0000			OFF	This selects whether the CF flag of the TCG is to ON.
	FLAG	0001			ON	0: CF flag is OFF.
						1: CF flag is ON.
509	DF MODE	0000			DF	This selects the DF/NDF mode for CTL and TCG.
		0001			NDF	0: Drop frame mode.
						1: Non-drop frame mode.
						No. 509 is valid when the CONTROL is LOCAL or LOCAL
						ENA of item 004 to “ENA”.
510*	RUN MODE	0000			REC	This selects the time code generator run mode.
		0001			FREE	0: Generator runs only during recording.
						1: Generator runs during usual operation.
						<Note>
						Even if “0” is selected, the time code generator runs during
						usual operation when “1” is selected at the setting menu
						No. 504 (REGEN MODE).
511*	TC OUT	0000			V OUT	This is used to switch the phase of the time code, which is
	REF	0001			TC IN	output from the TIME CODE OUT connector, for the external
						LTC input when the TC INT/EXT switch is at the EXT
						position. (In EE mode only)
						0: Time code is synchronized with output video signal.
						1: Time code is synchronized with external time code input.

*The Setup menu can only be displayed for the model AJ-D450.

<VIDEO>

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display				display
600*	PB/PR	0000			MII	This selects the component input signal level.
	IN LV	0001			B-CAM	0:	MII level.
						1:	ß cam level.
601*	INT BB	0000			OFF	This selects whether to generate the internal black burst
	SIG	0001			BB	signal.
						0: Signal is not generated.
						1:	Signal is generated.
602*	INPUT	0000			B/W	This selects color killer processing for the video input signals.
	C KILL	0001			AUTO	0: The signals are forcibly processed as B/W signals.
						1: The signals are automatically processed.
603*	OUT	0000			N-VF	This selects whether to float the vertical sync position of the
	VSYNC	0001			VF	video output in order to align the video output phase with the
						input in the EE/record/edit modes.
						0: Signals are not floated.
						1:	Signals are floated.
604	V-MUTE	0000			N-MUTE	This selects whether the video output signal is to be muted
	SEL	0001			LOW–RF	when the blank portion of the tape is detected during
						playback.
						0: No muting (picture freezes).
						1: Muting (picture turns grey).
605	CC (F1)	0000			BLANK	This selects ON or OFF for the closed capture signal in the
	BLANK	0001			THRU	first field.
						0:	Forced blanking performed.
						1:	Blanking not performed.

The underline on the setting item denotes the initial setting.

– 39 –