Panasonic AJ-D440, AJ-D450 manual RS-232C Remote 25-pin D-SUB straight cable supported, Signal

Page 65

RS-232C REMOTE (25-pin D-SUB straight cable supported)

	Pin No.	Abbreviation	Circuit	Description

	1	FRAME GROUND	Protective ground	Frame ground

	2	TxD	Transmitted data	Receives data from the PC.

	3	RxD	Received data	Sends data to the PC.

	4	RTS	Request to send	Shorted with pin 5.

	5	CTS	Clear to send	Shorted with pin 4.

	6	DSR	Data set ready	Positive power output after communication enable
	6	DSR	Data set ready	status
				status

	7	SG	Signal ground	Signal ground

	20	DTR	Data terminal ready	No processing

ENCODER REMOTE (15P)

Pin No.		Signal		Pin No.	Signal	Pin No.		Signal

1				6	SYSTEM H	11	RET GND
1				6	SYSTEM H	11	RET GND
2	SET UP			7	SYS.SC COARSE (2)	12
2	SET UP			7	SYS.SC COARSE (2)	12

3	C LEVEL			8	–12V	13
3	C LEVEL			8	–12V	13

4	GND			9	HUE	14	SYS.SC FINE
5	+12V			10	VIDEO LEVEL	15	SYS.SC COARSE (1)

– 65 –

Image 65

Contents Page FCC Note Contents General and Features Analog input/output Menu-driven setupDigital audio input/output Serial digital input/outputCounter Display Section Controls and their functionsCassette insertion slot Power switchEject button EDIT/EDIT REC/REC/REC INH lamps AJ-D450 onlyPage @2Volume control @1Headphones jack@4CTL/TC/UB switch @5MONITOR Select switch#3AUDIO Input switch AJ-D450 only #2VIDEO Input switch AJ-D450 only#4REMOTE/LOCAL switch #0SET buttonConnector area Signal GND terminal AC in connectorAnalog Audio in connectors Time Code in connector5ANALOG Component Video OUT connector 4S1-VIDEO OUT connector6ANALOG Composite Video OUT connectors 7REMOTE connectorType Description TapesConsumer CassetteWhen recording/playback using 1 unit When recording, playback & editing with 2 units deck to deck When using an editing controller Connect the equipment as shown in the figure below Internal encoder adjustmentsVideo OUT REF BB Recorder OUTAdjust the connected P2 VTR in the same way Beta Printed circuit boardSwitching on the power/inserting the cassette Still Timer Setting Stop modeRecording AJ-D450 only 1Selecting video/audio input signals2Adjusting the audio level Playback Setup default settings Changing the file Setup setting menusSetup menus USER1 Page Page Basic Setting Description Setup menus Operation Setting DescriptionID SEL 9P SELOther DvcproAuto STDNON-STD ServoSetup menus Edit Tape ProtectSetup menus Time Code Video Setting Description Audio Audio Setting Description Step CUE SlowLinear LoadTime code Time code/user bitRecording internal/external time codes Setting the internal time codeSetting the external time code TC switch → EXT Reproducing the time code/user bit Superimpose screen Servo reference Servo reference setting tables Audio V Fade Function AJ-D450 only Rack mounting Condensation Video head cleaningDiag menu Error messagesError messages Page Error messages External interface specifications Hardware specificationsRS-232C interface IntroductionRS-232C interface Page RS-232C interface Page Commands relating to inquiries CLS Microsoft QuickBASIC sample programConnector signals RS-232C Remote 25-pin D-SUB straight cable supported SignalGeneral SpecificationsPage Panasonic Canada INC