Panasonic AJ-D440 CUE Slow, Step, Linear, USER2, USER3, USER4, USER5, Save, Locked, On Load

USER menu

<AUDIO> (continued)

	Item		Setting
						Description
No.	Superimposed	No.		Superimposed
	display				display
725	CUE SLOW	0000			STEP	This selects the tape travel status (CUE track playback
						status) during SLOW playback.
		0001			LINEAR
						0: Priority is given to the output picture, and tape travel is set
						to the step feed status.
						1: Priority is given to CUE track playback, and the tape
						travel is set to the linear status.
	<Notes> When “1” (LINEAR) has been set:
	• It may not be possible to achieve as clear a picture as in the STEP mode.
	• The CTL counter may not operate properly.

<MENU>

	Item		Setting
						Description
No.	Superimposed	No.		Superimposed
	display				display
A00	LOAD	0000			USER2	This selects the user file whose contents will be loaded into
		0001			USER3	USER1.
						0: The USER2 file contents are loaded.
		0002			USER4
						1: The USER3 file contents are loaded.
		0003			USER5
						2: The USER4 file contents are loaded.
						3: The USER5 file contents are loaded.
						<Note>
						When the SET button is pressed after loading, the setting will
						be stored in the memory. When the MENU button is pressed,
						the setting will not be changed.
A01	SAVE	0000			USER2	This selects the user file into which the USER1 settings will
		0001			USER3	be saved.
						0: The settings are saved in USER2.
		0002			USER4
						1: The settings are saved in USER3.
		0003			USER5
						2: The settings are saved in USER4.
		0004			LOCKED	3: The settings are saved in USER5.
						4: This display appears when all the user files are in the
						change prohibit status.
						<Notes>
						• User files whose status have been set to change prohibit
						cannot be selected.
						• When all the user files are in the change prohibit status, the
						“LOCKED” display appears and the contents cannot be saved.
A02	P.ON LOAD	0000			OFF	This loads the contents of the selected user file into USER1
						and it starts operation with the USER1 settings when the
		0001			USER2
						power is turned on.
		0002			USER3
						0: Operation is started with the settings of the previously set
		0003			USER4
						user file.
		0004			USER5	1: The contents of USER2 are loaded into USER1 and
						operation is started with the USER1 settings.
						2: The contents of USER3 are loaded into USER1 and
						operation is started with the USER1 settings.
						3: The contents of USER4 are loaded into USER1 and
						operation is started with the USER1 settings.
						4: The contents of USER5 are loaded into USER1 and
						operation is started with the USER1 settings.
A03	MENU LOCK	0000			OFF	This selects whether to set or release the user file (USER2 –
						USER5) lock mode.
		0001			ON
						0: The lock is released (changes can be made).
						1: The lock is set (changes are prohibited).
						<Note>
						The lock cannot be set for USER1.

The underline on the setting item denotes the initial setting.

<Notes>

•No. A00 (LOAD), No. A01 (SAVE) and No. A02 (P.ON LOAD) are the menu items which can be set only for USER1. They are not displayed with the USER2 – USER5 files.

•No. A03 (MENU LOCK) is the menu item which can be set only for the USER2 – USER5 files. It is not displayed with USER1.

– 43 –