Panasonic AJ-D450 9P SEL, Id Sel, Other, Dvcpro, RS232C SEL, Baud Rate, Data, Length, Stop BIT

Setup menus

USER menu

<INTERFACE>

	Item		Setting
								Description
No.	Superimposed	No.		Superimposed
	display				display
201	9P SEL	0000			OFF	This selects whether the 9P connector functions when the
		0001			ON	REMOTE/LOCAL switch has been set to REMOTE.
						0:	Do not function
						1:	Function
202	ID SEL	0000			OTHER	This selects the ID information which is returned to the
		0001			DVCPRO	controller.
						0:	20	25H
						1: DVCPRO’s, own ID is returned (F0 33H).
204	RS232C SEL	0000			OFF	These settings are for selecting whether the RS-232C
		0001			ON	connector is to function when the REMOTE/LOCAL switch is
						set to REMOTE.
						0: Connector does not function.
						1:	Connector functions.
205	BAUD RATE	0000		300		These settings are for selecting the RS-232C communication
		0001		600		speed (baud rate).
		0002		1200
		0003		2400
		0004		4800
		0005			9600
206	DATA	0000		7		These settings are for selecting the RS-232C data length.
	LENGTH	0001			8	(Unit: bit)
207	STOP BIT	0000			1	These settings are for selecting the RS-232C stop bit length.
		0001		2		(Unit: bit)
208	PARITY	0000			NON	These settings are for selecting the none, odd or even for the
		0001			ODD	RS-232C parity bit.
		0002			EVEN	0: Parity bit is not used.
						1: An odd number of bits is used for the parity system.
						2: An even number of bits is used for the parity system.
209	RETURN	0000			OFF	These settings are for selecting whether the ACK code is to
	ACK	0001			ON	be returned when a command is received from RS-232C.
						0: ACK code is not returned.
						1: ACK code is returned.

The underline on the setting item denotes the initial setting.

– 34 –