Panasonic AJ-D450, AJ-D440 manual Audio Setting Description

Setup menus

USER menu

<AUDIO> (continued)

	Item		Setting
							Description
No.	Superimposed	No.		Superimposed
	display			display
716	REC CUE	0000			CH1	This selects the input signal recorded in CUE.
		0001			CH2	0: The signal selected by SETUP-MENU No. 714 is recorded
		0002			CH1+2		on CH1.
						1: The signal selected by SETUP-MENU No. 715 is recorded
							on CH2.
						2: The signal selected by SETUP-MENU No. 714 and No. 715
							are mixed and recorded on CH1 and CH2.
718	DV	0000			ST1	This selects the AUDIO CH1 and CH2 output signals during
	OUTPUT	0001			ST2	DV or DVCAM format playback.
		0002			ST1+2	0:	The CH1 track signals are output to CH1 and the CH2
							track signals to CH2. (Only the sound during shooting is
							output.)
						1:	The CH3 track signals are output to CH1 and the CH4
							track signals to CH2. (Only the audio dubbing sound is
							output.)
						2:	The mixed CH1 and CH3 track signals are output to CH1
							and the mixed CH2 and CH4 track signals to CH2. (The
							sound during shooting and audio dubbing sound are
							output simultaneously.)
	<Note> This item setting is valid only when the tape recorded on the four channels of the DV or DVCAM
	format is played back.
719	PB FADE	0000			AUTO	This selects the processing method for the audio edit points
		0001			CUT	(IN point, OUT point) during playback.
		0002			FADE	0:	According to the status during recording. (Setup menus
							No. 309, 310)
						1:	Forced CUT
						2:	Forced FADE
720	EMBEDDED	0000			OFF	This selects whether to superimpose the audio data onto the
	AUD	0001			ON	serial output.
						0:	Data is not superimposed.
						1:	Data is superimposed.
	<Note> This item is valid when both optional serial interface and optional digital audio interface boards
	have been installed.
721	LINE CH	0000			PCM	This selects the audio output (LINE OUT).
	SEL	0001			AUTO	0: PCM AUDIO or QUICK PCM AUDIO is output.
						1:	Whatever is selected by SETUP-MENU No. 713 (MONI
							CH SEL) output.
	<Note> The PCM AUDIO or QUICK PCM AUDIO output is not affected by the AUDIO MONITOR
	SELECT SW, and CH1 and CH2 are output independently.
722*	INT SG	0000			OFF	This selects whether the internal signal is to be used for the
		0001			ON	audio input signal.
						0: The internal signal is not selected.
						1: The internal signal is selected.
	<Note> The internal signal has a frequency of 1 kHz.
723	DV PB ATT	0000			OFF	This selects the audio output level for DV format playback.
		0001			ON	0:	The audio output level is not attenuated.
						1: The audio output level is attenuated (reduced).
	<Notes> As indicated below, whether the setting takes effect or not depends on the size of the cassette
	tape used.
	1. When an “L” size cassette is used
	The setting takes effect only when “DV” has been selected as the setting for setup menu
	No. 108 (FORMAT SEL).
	2. When an “M” size cassette is used
	The setting does not take effect.
	3. When an “S” size cassette is used
	The setting takes effect only when “DV” has been selected as the setting for setup menu
	No. 108 (FORMAT SEL).

The underline on the setting item denotes the initial setting.

* The Setup menu can only be displayed for the model AJ-D450.

– 42 –